Electronics Forum: distributer (Page 1 of 34)

Acceptable level of defects for Wave Soldering

Electronics Forum | Tue Sep 28 08:56:01 EDT 2004 | grayman

"The optimizer has FLUX DISTRIBUTION WINDOW it measures - the amount of flux applied. -Identify uneven distribution of your flux. The FLUX DISTRIBUTION WINDOW permits you to obtain information about your fluxer's performance and repeatability

Web Email Problem Resolved

Electronics Forum | Wed Sep 29 14:30:58 EDT 1999 | Clifford Peaslee

Hello all, There was a problem with the web email system, and it has not been distributing emails properly since Sept 25. It is now fixed, and the awaiting emails have been distributed. Sorry for the inconvenience, Cliff

Distributed Test and inspection

Electronics Forum | Fri Feb 14 11:45:11 EST 2003 | SV

I was wondering if you guys had any experience with a distributed coverage Test and inspection strategy (Awaretest Xi) and could point me to technical studies in the field. thanks

Water Absorption of PCB

Electronics Forum | Thu Feb 15 22:55:45 EST 2007 | davef

Questions are: * Is the blistering in the solder mask or the laminate? * If the blistering is in the solder mask, what do the blisters look like [eg, size, quantity, distribution, etc]? * If the blistering is in the laminate, what do the blisters loo

Universal GSM1 startup error

Electronics Forum | Thu Aug 06 20:08:35 EDT 2015 | edwaterfall01

It could be a blown fuse on the power distribution panel or a failed power supply. Check the power distribution board in the front lower center of the machine. There are 11 LEDs on the board and 10 should be ON

Solder bath eruptions

Electronics Forum | Mon Mar 07 09:19:30 EST 2005 | patrickbruneel

Check your heater elements one or more are defective causing uneven heat distribution.

IET Wave Solder

Electronics Forum | Tue Aug 30 09:06:15 EDT 2005 | pjc

Its not made by them. Its one of those Chinese jobers they are distributing.

Seeking very low volume production reflow oven

Electronics Forum | Tue Apr 25 16:35:24 EDT 2006 | russ

Looking at who is distributing them should tell you something!!!!

Testing for Lead Content

Electronics Forum | Wed Feb 16 22:52:09 EST 2011 | ppcbs

Exactly! Who distributes them?

Re: Toombstone

Electronics Forum | Mon Nov 20 05:45:39 EST 2000 | Daniel Carlsson

Hi! Some varibles that I would think increase the risk: -The use of Nitrogen when soldering. -The use of IR may cause thermal vias (if placed only on one "side") to produce uneven heat distribution and thus wick the comp. -Uneven heat distribution.

  1 2 3 4 5 6 7 8 9 10 Next

distributer searches for Companies, Equipment, Machines, Suppliers & Information