Electronics Forum | Thu Oct 10 13:58:48 EDT 2013 | hegemon
The machine has good enough specifications for general BGA rework. Yes, it looks like a copy, and is similar to a number of rework stations. Your problem might be getting spare parts for this machine once in use. If it does not have remote TC, you mi
Electronics Forum | Thu Nov 07 15:33:02 EST 2013 | mleber
Below are a few photos of an ongoing issue we are having with 1 pwb style. Some of the pads appear to have contamination that appears after the selective solder step. The joints are extremely hard to rework - almost impossible. We had the joints anal
Electronics Forum | Sun Nov 10 15:36:06 EST 2013 | davef
Assuming your conformal coating material was selected with the intent of living a life in contact with oil, why doesn't your coating meet the IPC-A-610D requirement of that there be no voiding, no breaks in the surface, no loss of adhesion, etc? Furt
Electronics Forum | Wed Nov 20 16:47:10 EST 2013 | aaronpavone
I have a right angle male shrouded connector and the whole set of termination leads is tin lead plated, at least 100 microinches thick. Should the entirety of the lead be conformal coated? Or can we have just the joint coated? I know I have coated le
Electronics Forum | Tue Jan 14 08:48:09 EST 2014 | davef
I don't know. What does your paste supplier say? You can run tests * That you used to qualify this paste in the first place. * According to IPC J-STD-005A Requirements for Soldering Pastes * Using your toughest stencil to print this paste on a bare c
Electronics Forum | Sat Jan 18 12:03:54 EST 2014 | jimmyboz
Hi, > > My FUJI CP65 is working last couple of > month. Last week, it display "Hardware NG" > message when I power on. I can not find this msg > in the manual. Does anyone has experiences with > this to point me where I should > look? Thanks, -
Electronics Forum | Mon Jan 20 11:07:18 EST 2014 | jorge_quijano
Hola We will start producing flex cables soon for a new project, we've never built them in house, we have no experience in this field, most of our products are PCBA & Backplanes. I'm guessing that I can run this cables using a fixture to secure the s
Electronics Forum | Tue Feb 04 05:15:40 EST 2014 | spoiltforchoice
Take a look at the ROI tools supplied my MyData and others and draw inspiration from there. Presumably if you are looking at a higher speed line you are looking at higher throughput than you currently achieve or possibly fewer/shorter shifts? The eco
Electronics Forum | Thu Feb 06 11:41:40 EST 2014 | EricW
Years ago I received a sample of adhesive dots that were on tape and reel and could be pick n placed with standard equipment and withstood reflow. I have a current need for these and cannot remember a vendor or manufacturer. Does anyone know of this
Electronics Forum | Thu Feb 06 12:32:24 EST 2014 | gnus
Hi all, During our last production run, our MyData TP9 machine shut down on its own mid assembly. Screen went blank. I turned off the power switch and waited 10mins before trying to power it up again. I turn the switch on and hear the fan turning on
