Electronics Forum | Mon Mar 07 11:54:46 EST 2011 | rway
Now I have a clearer picture of your operation. It seems your company does not want to incur the cost of board redesign, and I thought it was the initial investment of the capital equipment that had them scared. You stated, "Unfortunately I can't g
Electronics Forum | Fri Mar 04 19:38:44 EST 2011 | olddog
We are a very small (2 people) company and have recently purchased a used Quad 4c Mk II, for our low-volume in-house production. The machine appears to work perfectly for our needs. My question is regarding programming from a concept standpoint. Our
Electronics Forum | Tue Apr 05 10:36:24 EDT 2011 | frcdave
Hi Don, The YESTech B3 can be used post placement very easily. I would suggest contacting their service team, they could walk you through the process quickly. You are actually very close to being able use it now in that capacity since you have the i
Electronics Forum | Tue Jun 07 08:31:57 EDT 2011 | bootstrap
I am building a rugged digital video camera product that essentially is just a sandwitch of 3 parts: #1: front piece is machined aluminum with C-mount thread #2: middle piece is 1/16" printed circuit board #3: back piece is machined aluminum The
Electronics Forum | Tue Aug 16 19:03:26 EDT 2011 | rsikora
Hi, I have a faulty intermec printer CPU > board. > > I'm probably in the wrong place but if > anyone can give me some help, I would really > appreciate it. > > I manage to connect an > incorrect thermal printhead to the printer and I > think
Electronics Forum | Tue Aug 23 13:50:46 EDT 2011 | cyber_wolf
The time it takes to PM a CP643 is really dependent on how much you run the machine. If you are running 3 shifts obviously the machine will require more attention than one shift. You are probably not going to want to hear this, but it does take a su
Electronics Forum | Tue Sep 20 14:03:53 EDT 2011 | russw
We don't have the equipment to check specific gravity, we just assume what's on the bottle is correct and we've never had a problem. The stone sits in an open chamber, so there really isn't any pressure to check. When we vary the air flow, the foam
Electronics Forum | Tue Nov 01 20:40:03 EDT 2011 | mikeincal
What may be happening is an early trigger of your vacuum sensors during production due to a clogged tip or vacuum line in the head. What happens during production is that the Y axis gets into position, and then the vacuum sensor input is monitored on
Electronics Forum | Thu Nov 17 14:33:02 EST 2011 | olddog
Thanks again Bobpan for all of your help. I hope some of my questions are dumb ones. Regarding "first", the QA error 0, you were right. In checking the setup, for some reason theta was 65227 instead of the 0 that I thought I had set. Regarding "sec
Electronics Forum | Fri Dec 16 10:13:33 EST 2011 | rapid
About the automated printing machines: They are all a little different, but the alignment part of the process is basically the same. I don't know if you have ever seen an automatic printer, so I'll do my best to explain it. The PCB rides into the
