Electronics Forum | Fri Feb 11 16:11:52 EST 2005 | Grant
Hi, Your right, and that's the thing I liked about MYDATA, even though we are selling ours now, and putting in Fuji'. I would still by a MYDATA if I was starting again, and doing low volume. When we started we kept our first product as simple as po
Electronics Forum | Mon Oct 24 18:48:23 EDT 2005 | GS
Thanks Gents for your replies, first of all I am not involved in production or sale of those tools. It was just a discussion during one of those so many "panic full" work shops / symposiums on WEEE and ROHS matter organized by material or SMT equip
Electronics Forum | Wed Nov 02 14:31:55 EST 2005 | erokc
First about the forum posting, my displayed name "Dave" comes up as my logon name "erokc" on this computer, not so on another computer I use??? Author names that allow email can be selected like "Dave". Bobpan, click on "Dave" to send an e-mail. Y
Electronics Forum | Wed Nov 01 07:32:33 EST 2006 | davef
What you have run up against is the unfortunate consequence of the transition period from Sn-Pb to Pb-free. In the past 2-3 years there have been several studies highlighting the differences in reliability between mixed metal systems, Sn/Pb, and SAC
Electronics Forum | Wed Mar 28 11:27:32 EDT 2007 | jmelson
Hello, I was the guy asking about doorway size for a Philips CSM84. Well, we cut the doorway using the best info we could get, and managed to get the machine inside with only a few scratches on the paint! Still no door, hopefully the fabricator wil
Electronics Forum | Mon Mar 03 17:42:35 EST 2008 | tonyamenson
I stripped the entire board because I had to have the boards troubleshot. Had a high failure rate from the field. The board coating was applied about 5 months ago. I was told by my people anything past 3 days and you will need this type of stripper
Electronics Forum | Mon Mar 03 12:25:37 EST 2008 | daxman
The problem was first noticed while doing a nozzle center. The wide angle camera would not display an image. After rebooting the machine (sometimes it took several tries) the camera would work. A few months later, the wide camera would not boot at a
Electronics Forum | Wed Nov 19 13:16:54 EST 2008 | sjpence
Simon, The equivalence factors were used to scale the values measured by ionic testing equipment to the values measured in the standard manual method. There is a good write-up by Bill Kenyon in this Technet Post describing the creating of the facto
Electronics Forum | Wed Jun 24 08:19:59 EDT 2009 | fujiphil
Hi, Procedure how to replace the x-ballscrew of CP642. 1. Before you remove the x-motor, remember the pulse of x-axis motor just it turn ON the zero set sensor. Pulse usually at 1000pls. +/-50pls. 2. Turn Off the machine. 3. Compress the two ballsc
Electronics Forum | Wed Nov 04 11:35:01 EST 2009 | dilogic
1. can you load cut tape onto the feeders, or only reels? You can, but you have to use cover tape extender (pretty cheap, though) >2. how about parts on trays (like Atmel AVRs in the QFP package)? You need tray feeder. But you can "make" your own