Electronics Forum | Sat Dec 13 07:34:12 EST 2008 | pgarsoe
SMTnet was down yesterday due to a big ice storm in the Northeast USA... we received a number of calls and emails to let us know... thanks... and thanks to Roland and Mike for there yeoman efforts in getting us back...our server is in a noc right nex
Electronics Forum | Wed Sep 23 08:17:46 EDT 2009 | kpm135
I've run into mysterious light curtain errors before and what was happening was when the head moved across the top of the components one of the clear tape covers would flutter up and trigger the curtain then it would settle back down on top of the ta
Electronics Forum | Fri Dec 18 06:08:14 EST 2009 | fönsi
I measured the diference soldering the TC to the pad and just tape down it, because i had a trouble with accuracy of some TC's. For the TC's I just taped down, I used additional heat-conductive paste to make a a termal connection from the TC to the s
Electronics Forum | Tue Mar 30 05:27:06 EDT 2010 | accuspares
Hi, Can you tell me at what point in the print cycle the error happens and if it consistently happens at the same point? The machine has two crash beams running down either side of the machine as a safety measure to ensure the table is down before
Electronics Forum | Fri Mar 26 21:48:56 EDT 2010 | dman97
Can someone explain to me what I'm supposed to do after I have done the vision offset calibration procedure? The manual tells me to put solder paste down on all 25 holes of the stencil. After this the board drops down and the machine scans each fidu
Electronics Forum | Thu May 27 19:00:37 EDT 2010 | emrtech
not just speed, looking to reduce down time on having to re-do boards from bad stencil screening. also, the accuracy of placing solder paste down on PCB's. why would you want an employee spending so much time aligning fiducial marks from panel to pan
Electronics Forum | Mon Sep 20 11:58:22 EDT 2010 | dman97
Hi, I was wondering if anybody knows of a way to close the hood on a 265gsx after it has been opened and the machine has been shut down? What I’m trying to say is that the machine was shut down with the hood raised and the prop rod on. When I boot
Electronics Forum | Mon Dec 20 04:41:38 EST 2010 | accuspares
Hi, The input indicators can be located by selecting the 'Input' page located in the 'Diagnostics' drop down menu. Just select the Align tab at the top of the page and you'll be able to see when the nearly home and home sensors change state. The pr
Electronics Forum | Thu Apr 07 04:32:13 EDT 2011 | jacki
Dear All During SMT process, some Tant caps were fell down without touching Epoxy . I found the problematic Tant Termanations were bended with gap. So I called to Vender and expalined this gap but the answer was the gap was within their standard and
Electronics Forum | Thu May 12 18:32:02 EDT 2011 | jbaez1
Also... this is ONLY a pick issue? No issues with > placement for those that you do successfully > pick? > > Have the spindles been calibrated > lately? Hi Vickt! thanks for your comments,,during step mode no failure at all, the spindle moves d