Electronics Forum: durostone material (Page 1 of 3)

Looking for trays to lay boards on in reflow oven

Electronics Forum | Mon Jun 10 05:05:33 EDT 2019 | pcbconnectchina

Hello! Don, I heard from SMT factory that the fixture for oven they use is durostone material, I don't if durostone is correct name translated, it is synthetic stone made of carbon fiber sheet. Best Regards Clare PCB Connect China

Jig for PCB

Electronics Forum | Tue Apr 18 12:43:19 EDT 2006 | pjc

Delmat and Durostone materials work well for process carriers that will see many runs through the oven: http://www.ascenteceng.com/resources/materials.html

wave pallets and titanium

Electronics Forum | Tue Sep 11 12:56:03 EDT 2007 | jsloot

Can anyone give me any information on the longivity of titanium insert wave pallets. What I am looking for is the integrity of thin walls over several hundred cycles and the interface between the insert and the durostone material.

Milling durstone

Electronics Forum | Mon Dec 20 09:46:21 EST 2010 | azbvc

I have to make a few fixtures using durostone Material. I would like to know what end would be best to use for milling pockets out. I tried using HSS 1/4 in all I did was burn it up. Also I tried to use a 1/4 " carbide end and burnt that up too. any

Flex board pallet

Electronics Forum | Sat Jul 29 04:20:12 EDT 2006 | Olas

Sorry, I found it. I typed Durastone instead of Durostone. Interesting material. Have a good day, Olas

Solder Pallet Maintenance?

Electronics Forum | Thu Jun 28 13:36:49 EDT 2007 | carln

Permali is the manufacturer of Durostone pallet materials and they recommend the following methods: http://www.permali.com/pallets/PDF/Tech21.pdf http://www.permali.com/pallets/papers.htm

Looking for trays to lay boards on in reflow oven

Electronics Forum | Mon Jun 10 08:51:01 EDT 2019 | don_julio

Thank you Clare. After doing some more research, I found they are known in the industry as "Carriers". I did look into that durostone material. They prices are beyond reasonable. My trek now is seeking a material to make planks out of to lay the b

Looking for trays to lay boards on in reflow oven

Electronics Forum | Mon Jun 10 12:52:02 EDT 2019 | slthomas

The only material I've ever heard of for these applications is the one that you have already rejected (Durostone). There is a similar material called Durapol, and if memory serves me correctly it is somewhat cheaper than Durostone.

warpage after reflow

Electronics Forum | Tue Oct 07 22:15:12 EDT 2014 | padawanlinuxero

How to avoid /reduce warpage in long length PCB & > _1.6MM THICK PCB. You need to put it in a fixture or pallet to run it in the reflow oven, most common material use here is durostone for the pallets that we run in the reflow oven, we use Durosto

Reflow Pallet hardware

Electronics Forum | Wed May 25 09:29:26 EDT 2005 | PW

In a time crunch, kapton tape works great. If you are using durostone or some material like that for carriers, make sure it is clean right after you machine it and the kapton will stick very well. We are low volume so we pretty much always use tape

  1 2 3 Next

durostone material searches for Companies, Equipment, Machines, Suppliers & Information