Electronics Forum: eci and 200 (Page 1 of 6)

SMT optimization and improvement

Electronics Forum | Thu Jun 01 04:01:33 EDT 2006 | ts

The PT200 at line converter able to optimize your program to balance the line.

Mydata Pick and place

Electronics Forum | Tue Aug 28 09:53:44 EDT 2001 | Brock

Stefan, I could be wrong but I have a question about every 10th board having a defect. If a machine places 1 million components and a the board has 200 components you arrive at 5000 boards. If every 10th board has a defect, then only 500 boards have

Pick and place labels

Electronics Forum | Thu Sep 23 11:50:54 EDT 2004 | JB

We are using a standard nozzle Once placed, the label is not flat, the ends of the label are slightly lifted on both ends. The label is .650 x .200 Have you guys run into a similar problem?

SMT optimization and improvement

Electronics Forum | Thu Jun 01 04:13:05 EDT 2006 | jacksaria

Hello TS, Our CM402 and 301 have encountered pick and throw. Do you have additional inputs?What is PT200?Please explain how it can help to optimize the program? regards,

0402's and Gluing.............

Electronics Forum | Wed Feb 16 16:41:31 EST 2005 | Mrduckmann2000

Pallets will not work in this case because the wonderful designers put 0402's between the legs and all around the legs of the thru-hole connectors. There are 18 thru-hole connectors on this board and 200 - 0402's around them. The 0603's that are al

High-end SPI and AOI?

Electronics Forum | Tue Oct 13 08:09:53 EDT 2009 | kudamarani08

Can anyone help me recommend or simulate a SPI and AOI machine that can balance our FUJI NXT 1 with 14 modules. We are using MPM accela printer. 200 UPH is our target. Here's the PCB dimension length(x) = 399.92mm width(y) = 141.626mm Thanks all!

Mydata Pick and place

Electronics Forum | Sun Aug 26 12:40:59 EDT 2001 | stefwitt

I would like to enter the discussion by tossing some numbers in. First of all I don�t like the 3 Sigma value. 3 Sigma are 2000 defects per mio. if I remember correctly. This means, if you have 200 components on the board, then every 10 boards have on

High-end SPI and AOI?

Electronics Forum | Tue Oct 13 22:56:22 EDT 2009 | cpcompany

Can anyone help me recommend or simulate a SPI > and AOI machine that can balance our FUJI NXT 1 > with 14 modules. We are using MPM accela printer. > 200 UPH is our target. > > Here's the PCB > dimension > > length(x) = 399.92mm width(y) = >

Blistering and delaminating boards

Electronics Forum | Thu Sep 20 07:18:42 EDT 2018 | proceng1

Has anyone else been experiencing this lately? We have had a rash of boards that come in properly vacuum sealed. We store them in the hot room until we are ready to build, and we get bubbles under the solder mask. We've had 4 different jobs, all di

Time and temp in lead and lead-free reflow

Electronics Forum | Sat Aug 02 08:06:11 EDT 2008 | pcbbuilders

Is there a limit to the time that most components can stay at temperatures around 130-200 deg c? if i slow the time, the first 4 zones will be at this temp for about 5 minutes in no lead process. i am concerned that some chips wont be rated at this t

  1 2 3 4 5 6 Next

eci and 200 searches for Companies, Equipment, Machines, Suppliers & Information