Electronics Forum | Wed Feb 08 01:30:02 EST 2017 | nikkilouie
Im having trouble with and Ekra x5 machine. It > works fine when up being run constantly, but if > it sits for 10-15 minutes when you try to move > the Y table to the front of the machine it makes > a loud sound as if the table is hitting/catchin
Electronics Forum | Fri May 20 12:14:25 EDT 2016 | strandy89
Im having trouble with and Ekra x5 machine. It works fine when up being run constantly, but if it sits for 10-15 minutes when you try to move the Y table to the front of the machine it makes a loud sound as if the table is hitting/catching on somethi
Electronics Forum | Fri Dec 15 07:14:10 EST 2023 | pete_b
Hello, we have some Problems with the camera of our EKRA E5. Does anyone have the Service Manual for us please? Would be great if anyone could send it to me. Thanks in advance Peter
Electronics Forum | Tue Aug 04 13:45:03 EDT 2020 | oxygensmd
There are one value for thickness during PCB-teach function which is the PCB thickness. The other one is the camera focus in machine option but it is a dangerous function because the camera focus is adjusted by raising/lowering table.
Electronics Forum | Thu Nov 15 11:03:17 EST 2018 | bobpan
When our older Ekra machines wont reference.....we will either try to e-stop it and then turn the control back on and reference it again....or turn the machine off and back on. I would check all the sensors on the machine and also try to reposition
Electronics Forum | Tue Jun 06 13:47:10 EDT 2023 | oxygensmd
In Hungary there are many EKRAs. Bosch, Zollner and many big/small company are using them. I also saw the latest DEK but I think DEK is over-complicated, fast and good printer - but if you have any problem, it cost a lot. MPM also nice machine but I
Electronics Forum | Tue Jun 06 14:26:00 EDT 2023 | spoiltforchoice
> In Hungary there are many EKRAs. Bosch, Zollner > and many big/small company are using them. I also > saw the latest DEK but I think DEK is > over-complicated, fast and good printer - but if > you have any problem, it cost a lot.
Electronics Forum | Thu Jun 01 12:54:33 EDT 2023 | tommy_magyar
I am using 2x SP710, one is 5 years old, the other one is one year old. The old one never had an issue, the new one had a camera problem when it was installed, but it was changed under warranty - no problem ever since. Very easy to use. I only ever
Electronics Forum | Fri Feb 02 12:57:41 EST 2024 | spoiltforchoice
Arguably there is essentially one model the SP700 or 710. If you don't need 29" there is also the discontinued 210. However I don't think the brand matters all that much. You want what you can find at the right price and you need the options o
Electronics Forum | Thu Apr 09 15:31:05 EDT 2020 | kumarb
Thank you for the replies. Neither the analog dimmable ballast (1-10V) nor the dimmable T5 2G11 socket bulbs have been fun to source. After countless hours of searching, believe that the Ebay listing here (Philips) is compatible: https://www.ebay.co
