Electronics Forum: ekra e4 e5 (Page 1 of 18)

ekra e5 blades not dropping.

Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77

Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement

ekra e5 blades not dropping.

Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd

I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the

ekra e5 blades not dropping.

Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin

After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir

ekra belt spare

Electronics Forum | Tue Nov 29 01:11:34 EST 2005 | ajay

I am looking for purchase of EKRA E4 spare from nor EKRA agent. part detail - BELT 80222B-20 L=1835MM 5011000002 Any contact pl. confirm. ajay

Manual for EKRA E4

Electronics Forum | Wed Nov 23 11:07:56 EST 2016 | uski74

Hi, I'm looking for user and service manuals for EKRA E4 and E5 machines.My e-mail is: uski7474@gmail.com. Any input will be appreciated. Thanks in advance. Vladimir

Cpk Variables Control for Paste Printing

Electronics Forum | Thu Apr 04 16:38:51 EST 2002 | davef

Equipment companies like to talk about �accuracy� and �repeatability�. These measures provide limited information. Flaws of the measure aside, some printer companies have begun to report Cp. * DEK ELA: Cp = 1.33 @ �0.025mm * DEK 265: Cp = 1.6 @ �0.0

EKRA E4 model Service Manual PDF

Electronics Forum | Mon Mar 04 07:44:57 EST 2019 | vrasak

Hello, My EKRA X5 printer does not clamp the PCB. I would like to the manual any E4, E5 or X5. Hope hopefully it should give me some clue. Could you please send me the manual E4, E5 or X5? vrasak@cncroom.com Thank you so much, Weerasak.

EKRA E4 direction change

Electronics Forum | Thu Aug 24 23:25:42 EDT 2017 | micropak

I have an E5 and I believe this is in service mode /machine configuration.

EKRA E4 model Service Manual PDF

Electronics Forum | Thu Mar 28 05:09:37 EDT 2019 | oxygensmd

You need to modify the language flag inside the e5.ini file if you have the old software. C:E4#8;edienedit e5.ini Search for "postdfix", it will be on D like deutsch (german), change to GB (english). For the new software, look for setlng.cmd.

EKRA E4 model Service Manual PDF

Electronics Forum | Thu Nov 19 09:09:42 EST 2020 | kumarb

From the user forum... You need to modify the language flag inside the e5.ini file if you have the old software. C:E4 edienedit e5.ini Search for "postdfix", it will be on D like deutsch (german), change to GB (english). For the new soft

  1 2 3 4 5 6 7 8 9 10 Next

ekra e4 e5 searches for Companies, Equipment, Machines, Suppliers & Information