Electronics Forum: electric floor heating cables (Page 1 of 1)

Contact CS400D problem

Electronics Forum | Tue Feb 08 10:25:46 EST 2011 | remullis

Michelle, It's been years since I worked on these machines and mine were CS400E's. The next time this error comes up instead of powering down Unplug the RS232 cable that links between the PC and the processor board in the machine, I cant remember if

Thermal Profiler Shield

Electronics Forum | Thu Jun 01 09:31:26 EDT 2006 | marc

All data loggers will be warmer at the higher lead free temps. Only two ways around this... better thermal barriers or fans after the profile to cool it down. Some places do not allow fans on the production floor due to static electricity, in that

Air Bath Rework System

Electronics Forum | Fri Jul 16 20:17:15 EDT 2004 | cisridn

Hello! I am an Electrical Technician with Filtronic Comtek. I am responsible for all of the Engineering changes and rework done to prototype and pilot run PCB's. My current rework equipment includes: Soldering irons, heat gun, and hot plate. Consid

New SMT line introduction

Electronics Forum | Tue May 16 02:12:58 EDT 2017 | robl

Hi Anthony, Hopefully some of the following may help: 1) Electrics - do you know the rating of each machine and the total load, and can your distribution box take it? Do you have the correct cabling and connectors in place to just plug the machines

Re: Need advise on regarding Vias

Electronics Forum | Fri Dec 17 12:09:09 EST 1999 | Boca

Outstanding advice gentlemen! To borrow Dave F's line "I'd like to take a bit of a different angle." Ie. a few wave solder specific issues If this assembly is going over wave solder then avoid vias under passive components, it invites solder bal

Need Expert Support - Popcorning

Electronics Forum | Wed Mar 14 11:51:24 EST 2001 | fmonette

Popcorning is the common designation for defects related to the moiture sensitivity of plastic molded components, like PBGAs. The plastic body of these parts will absorb moisture from the ambiant atmosphere on your factory floor. If a critical level

Mydata A12 tool tip damage

Electronics Forum | Fri Jul 20 07:09:29 EDT 2007 | chrispy1963

Sr. Tech, youre absolutely correct that the X-Wagon (pancake) motor is the one which will do final positioning when moving to a programmed position. The X Axis motor in back of the machine is used for rapid traverse of the axis. I was thinking more

PDBE and PBB replacements???

Electronics Forum | Fri Mar 11 18:47:54 EST 2005 | davef

JD: It's important to note that FR-4 does not contain PBB or PBDE. The bromine in FR-4 epoxy comes in the form of tetra-bromo-bisphenol A [TBBA], which polymerizes and become part of the cross-linked epoxy. Bromine, in the form of hydrogen bromide, i

Re: DFM / DFT information

Electronics Forum | Thu Jul 13 22:20:38 EDT 2000 | Dave F

=10 mils larger than lead 3 silk screen legend text weight >=10 mils 4 pads >=15 mils larger than finished hole sizes 5 place through hole components on 50 mil grid 6 no silk screen legend text over vias (if vias not solder masked) or holes 7 so

Flason SMT Products

Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar

flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt


electric floor heating cables searches for Companies, Equipment, Machines, Suppliers & Information

Jinchen Electric Technology Co,.Ltd
Jinchen Electric Technology Co,.Ltd

We are please to introduce ourself- ,who is one of the SMT solution provider for Global customers, we can supply Automatic Insertion machines spare parts, SMT spare parts, (including feeder ,Nozzle,PCB

Manufacturer / Consultant / Service Provider

The third floor,No 3, Yanghua Road,Huangdong Village ,Fengguang town
Dongguan, China

Phone: zoey@jinchensmt.com