Electronics Forum: electrical verifier mydata (Page 1 of 10)

mydata electrical test results

Electronics Forum | Thu Jun 10 16:40:48 EDT 2021 | cyber_wolf

Yes those verifiers seem like a good idea but they really don't work correctly. You would be better off verifying with a meter during reel changes than wasting your life on that thing. I concur that single mount will show the value.

mydata electrical test results

Electronics Forum | Tue Jun 08 22:30:05 EDT 2021 | vtdivtecs

So I am having a little trouble with my mydata MY19. its an older machine picked up used and its had its quirks. recently we tried to start adding electrical verification to our workflow, and had to disable it as we were getting intermittent bad pa

mydata electrical test results

Electronics Forum | Wed Jun 09 23:58:59 EDT 2021 | SMTA-64387687

The electrical test, on those older machines, wasn't very exact. Try to expand the tolerances, 25-30% for caps and 10% for resistors, and see if that solves your problem. Also, if I remember correctly, if you go into the layout and single-place the c

mydata electrical test results

Electronics Forum | Thu Jun 10 17:22:10 EDT 2021 | vtdivtecs

thanks! definitly not the answer I wanted to get, but it's good to hear it. Back when we sourced the machine a few years ago I was kinda against buying it as our production scale is so small it doesn't add a ton of value, BUT the electrical verific

MYDATA electrical test transistors issue?

Electronics Forum | Thu Feb 23 17:50:53 EST 2012 | burb1999

Trying to electrical test some transistors SOT-23, SOT323, SC70 and keep getting the no value obatined? What would cause this everything seems correct in all the part data, etc. In the parameters we have the option :) pnp: mechanical phase (2) leve

Samsung vs. Mydata

Electronics Forum | Wed Nov 24 07:58:14 EST 2010 | rgduval

I have used MyData's in two different companies, and have never used the Samsung machines. MyData's flexibility is, generally, key. The feeder designs allow for short strips to be loaded, as well as rapid change-over. The electrical testing capabi


Electronics Forum | Wed Feb 25 15:16:56 EST 2015 | dyoungquist

We have MY12 and MY15E machines. I am going to assume what we are seeing also applies to the MY100 series machines as well. Do you have the electrical verifier option that works with the midas head and centering jaws to check component values of

Samsung vs. Mydata

Electronics Forum | Wed Nov 24 02:53:50 EST 2010 | fönsi

Hello Our company has the opportunity to built a new smt line. we have looked several pick and place manufacturers and their machines. In the end, it will be the decision between two Samsung Modules (SM421) or two different MyData Modules (MY100SX a

Re: Which SMD placement machines are easiest to use?

Electronics Forum | Wed Jan 26 10:15:04 EST 2000 | Christopher Lampron

Maurice, I have worked with several different platforms of P&P machines and have a couple of thoughts regarding features and ease of use. The Contact Systems 3 series machines are versitile and very user friendly. I contribute this to the touch scree


Electronics Forum | Wed Jun 05 05:14:32 EDT 2019 | chafik

Hi guys, does anybody can help me out to activate the electrical test on my machine "mydata my12", i don't have this option, but i heard that there is a trick to activate this option. Thank you

  1 2 3 4 5 6 7 8 9 10 Next

electrical verifier mydata searches for Companies, Equipment, Machines, Suppliers & Information