Electronics Forum | Thu Nov 15 10:16:44 EST 2007 | dyoungquist
You can buy green fingernail polish and mark each handle with it. That may not look professional but it is much cheaper than buying an entire set of new tools.
Electronics Forum | Tue Nov 20 06:19:42 EST 2007 | kircchoffs
just add FIP2 in fujiflexa when you are adding machine at factory lines. if you are connected just receive the proper data from the machine and re-transmit the proper data.
Electronics Forum | Mon Nov 26 14:22:42 EST 2007 | scotceltic
If it is anything like my Flexa then you would have to purchase the IP2 module license in order to communicate with the machine from flexa. I have had to purchase separate licenses for my different pieces of equipment. CP6, NXT, QP3, CP7
Electronics Forum | Thu Nov 15 22:10:16 EST 2007 | davef
Questions are: What is: * Purpose of this PCB ink? * Meaning of 'non-conductive?' * Temperature of your laser? * Reason solder mask is not the product of first choice? * Space of the unsoldered region located between soldered areas? * Maximum cure te
Electronics Forum | Thu Nov 15 11:30:17 EST 2007 | mt396596
Could anyone recommend an esd safe masking tape for conformal coating that does not use a silicone based adhesive? I have looked into 3M's 7419 series and am awaiting samples, curious if there is another brand out there people have used. Thank you
Electronics Forum | Sat Nov 17 09:11:07 EST 2007 | davef
Try: http://ppitapes.com/catalogs/Conformal-coating.pdf We have no relationship, nor receive benefit from the company referenced above.
Electronics Forum | Mon Nov 19 21:25:07 EST 2007 | davef
J Webster: Can you send / post pix of your cracked capacitors? What do you think about our assumptions? They are: * No flex in end-item use * Supplier has no defective packaging * No hand soldering of these parts * No impact or flex from ATE * No H2
Electronics Forum | Mon Nov 19 08:48:12 EST 2007 | realchunks
Hi Bruce, What is your (and everyone elses)noticable defect if you reach the higher temps with FR-4? Delamination?
Electronics Forum | Mon Nov 19 10:37:53 EST 2007 | ck_the_flip
Bruce, Does the thicker barrel plating for "RoHS-Rated" PCBs alleviate some of the copper dissolution that one might experience from SAC305? Also, for those SN100c experts out there, is Sn100c less likely to dissolve copper?
Electronics Forum | Mon Nov 19 14:10:13 EST 2007 | realchunks
Hi Taint, Both machines work OK. The big thing you may over look is pre-heat. Things like flux spatter/boil tend to come into play if you don't pre-heat. Change over, ease of programming, and service are also things to think of.
.gif)
