Electronics Forum | Thu Nov 29 13:04:47 EST 2001 | Ken Lester
Francisco; I have had reasonable success with running 3.1 software against the MKCompat.exe file located in the Windows System directory. Try a web search to find out how to do this. This may help. i'm sorry I don't know the software well enough to
Electronics Forum | Tue Dec 04 09:35:58 EST 2001 | jdill
I have successfully reflowed 208,100 pin QFP'S and SOJ 28's on the bottom side of the board. The only thing i am "SCARED" to reflow on the bottom side are BGA'S. We used to turn off the bottom heaters but we did a trial run with them off and the boa
Electronics Forum | Mon Aug 26 09:26:51 EDT 2002 | Scott B
We have inherited the need to monitor saponifier concentration and would like to avoid the need to perform titration testing and would obviously like to introduce continuous monitoring if possible. Is refraction commonly used as a measurement method
Electronics Forum | Tue Dec 04 09:48:43 EST 2001 | davef
Defining the thickness of solder between the lead and the pad, J-001 states "Properly wetted fillet shall be evident." J-001 is available from http://www.ipc.org. Factors that affect this are: * Amount and composition of solder * Amount and compo
Electronics Forum | Wed Dec 05 10:16:42 EST 2001 | vervin
G. I utilized the line computer setup print outs and transferred this information to a controlled document. Our operators are only responsible for operating the machines not programming. In our W.O.I.'s, I list the .la file, the setup. I list each
Electronics Forum | Fri Dec 28 13:11:13 EST 2001 | cyber_wolf
Chris, I have worked with all kinds of Mydata's TP9,TP11,MY series machine for years. I have ran them, programmed them,and had just about every nut, bolt,motor, and circuit board out of them at one time or another.I have also written specialized mai
Electronics Forum | Thu Dec 06 15:33:22 EST 2001 | mrpsilva
Dear Reader, I have a line with a SP120 and a HS180. I am starting with some new projects using BGA component. Some one have placed BGA using HS180? Is there some tip, or any alternative way to do it? Awaiting ofr some help, I thank in advance! Bes
Electronics Forum | Thu Dec 06 18:23:01 EST 2001 | stefwitt
It has been done and I could set you up with some customers, who continue to place BGA's on the HS 180 successfully. In the GF editor you define the component as if it had leads around the perimeter. At the end of the editor you activate outline meas
Electronics Forum | Fri Dec 07 00:14:20 EST 2001 | Ivan R
Marcos ,, We do place BGA in our HS180 but not that often , as we do run into some problems sometimes . We found out the best way for us ,, to turn outline on , and also paint the outside of the BGA with white pen and you won`t have any problems .
Electronics Forum | Fri Dec 14 02:51:44 EST 2001 | genglish
This forum is becoming a salesmans dream! I agree with the first guy, check the archives as there is alot of information about cleaning and media. Our company uses a Kerry SC1000 machine very good process but mechanically we have had problems with t