Electronics Forum | Mon May 23 12:39:43 EDT 2022 | FSTechnology1
What I do is Google SEO, which is to operate the company's website. I used to sell other products. Now the company asks me to do pcba. I don't know much about this industry. The content of the website does not know how to do it, and the keywords do n
Electronics Forum | Mon May 23 12:55:59 EDT 2022 | proceng1
Unfortunately I was not able to import the file. My software outputs 3 files, including .BRD, which I never use. I thought it might be able to import it, but it just says that it doesn't recognize the format. I tried Allegra and a few others, but
Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Wed May 25 23:45:04 EDT 2022 | SMTA-64387687
1. The jetting head flies very low to the level of the board. So, performing AOI function will crash the head. 2. AOI is performed close to the end of the line, after P&P or reflow. Are you planning to run the boards back-and-forth, on the line? 3. L
Electronics Forum | Fri May 27 12:34:20 EDT 2022 | SMTA-64387182
On my PCB fab drawings, I specify SOLDER MASK PER ANSI/IPC-SM-840, should I specify a CLASS rating? It appears at one time the CLASSES were 1, 2, or, 3. I believe, they are now T or H. Correct? Thanks, Joe
Electronics Forum | Mon May 30 11:46:51 EDT 2022 | jojoled
You were right, that helped.....So If I enter all the data in "Compopnent dat" or Feeder data".....You can not delete any of that. If you want to delete anything unused, You have to be in Component data, then go to sub-menu : List Components, and del
Electronics Forum | Tue May 31 08:04:01 EDT 2022 | bukas
Hi, I am searching for a CMMS that will help me organize maintenance and calibration works. What do you use and what are your experiences? Some programs I saw out there are quite detailed and complex in some aspects of maintenance but lack some thing
Electronics Forum | Wed Jun 01 04:31:30 EDT 2022 | ttheis
This is a 0603 ceramic capacitor. Thanks for the tip; this helped us figure out the issue. We reduced lighting and saw an improvement but still had issues. Looking closer at the rejects (see pic#2 in original post) there were some shiny spots on the
Electronics Forum | Tue Jun 07 19:05:52 EDT 2022 | duchoang
First Article Inspection is always a MUST in SMT Process. If possible AOI would be added. We also have second operator/inspector to check on pick&place machine setup and use a program printout for inspector to compare/double-check with BOM and the ot
Electronics Forum | Wed Jun 08 03:09:44 EDT 2022 | pradeep14
Thank you. In our organization also we are following loading verification before starting the placement. But i want know before starting the placement during NPI/Proto Build, what are the system need to be followed to cross check with Pick & Place pr