Electronics Forum | Sun Mar 05 12:53:08 EST 2023 | dontfeedphils
I actually still have all my docs and software from that time. Just dug through some manuals and found one for "IS - Intelli PD" (program download). Couldn't tell you if this is still what it's called, but this is what we used to send pro
Electronics Forum | Mon Mar 06 18:07:33 EST 2023 | ccouture
We recently installed a new solder wave machine, The spray fluxer has a pressurized tank and because we use an alcohol based flux, the spray fluxer system must be fed with nitrogen. Anyone has infos on what installation is prefered to supply this mac
Electronics Forum | Tue Mar 07 03:54:00 EST 2023 | sophyluo1985
Dear SosigGuy , thank you very much. MY ENGINEERING TEAM would like to talk to you more about YAMAHA's expertise, can we write and talk to you? My fellow engineer would like to talk to you. (sales07@goldlandsmt.com, his name is Quinn, this is his
Electronics Forum | Tue Mar 07 11:50:11 EST 2023 | kirill
I am from Israel. We have some chinese guys in our second facility in china, who is working slower than us with a decade old methods (transfering files over usb to the machines from an offline computer). And the only support that we have here is only
Electronics Forum | Sat Mar 11 07:33:52 EST 2023 | klauss
There's two kind of nozzles with different dimensions we use. One of them works good but the another one gives a head problem sometimes. The head picks the nozzle and gives the vacuum error despite the camera recognize it. So i make another head pi
Electronics Forum | Sun Mar 12 13:49:09 EDT 2023 | phuongvbhp
Hello everyone I am having Chip loss error at Line SMT, Mounter Panasonic , component type 0402,0603. The positions are not the same and the ratio is around 7/1000. I suspect the chip was dropped during the PCB move behind the mount. The OP's operati
Electronics Forum | Mon Mar 13 01:53:25 EDT 2023 | sophyluo1985
Dear Klauss,Maybe you can ask our GOLDLAND company, we are very familiar with the AM100 machine, you can send a message to our engineering team and describe your problem. They'll be happy to sort it out for you. I'll introduce you to our engineering
Electronics Forum | Wed Mar 15 11:34:28 EDT 2023 | proceng1
I'm sure this isn't the same situation, but we did have a selective solder machine with crazy dross and solder ball build up. Turns out the operator switched the low pressure nitrogen line used for solder level and the high pressure nitrogen line fo
Electronics Forum | Fri Mar 17 14:59:50 EDT 2023 | proceng1
OK, does your axis screw have the flex coupler or the magnetic coupler? Which axis is it? Did you turn off soft limits? If it's out of range, soft limits won't let it move by controls. I need to know which axis before I can get too far into this. I
Electronics Forum | Mon Mar 20 21:46:31 EDT 2023 | emeto
The experimental way is the best approach for SPI settings and fine tuning. Have a start point of +/- 20%. You build 0402s and machine flags them 35% offset from value. You reflow, perform AOI - everything is fine. You go back and you move tolerance
