Electronics Forum | Mon Jun 15 16:31:25 EDT 2020 | rgduval
You may find some wetting issues running LF HASL with 63/37, as your reflow temperatures will be significantly below the LF reflow. On fiducials...if you don't have a quote for your boards with ENIG, I would recommend at least checking it out. It's
Electronics Forum | Wed Jun 24 16:51:25 EDT 2020 | kumarb
Hi. Taking this from a total different angle - why not use ENIG to avoid this issue but find more competitive suppliers? We source from offshore all the time and finding that due to this dreaded virus - the market pricing is soft. Many are willing to
Electronics Forum | Mon Jun 29 20:59:37 EDT 2020 | kumarb
Hi. The PCB does not look to be heavy. Suggest you try to email their staff - they are very good. Personally have worked with Scott there and he knows the VIOS software very well. https://trans-tec-america.com/contact/ We have the Assembleon Eme
Electronics Forum | Fri Jun 19 15:03:15 EDT 2020 | jmelson
OK, I am really happy with the robustness of my CSM84. I wonder how hard it would be to hack up one of these 3-phase machines to run off single-phase power? Mostly, it just feeds a big DC supply for the X-Y servos. 2 heads with ANE should be just FI
Electronics Forum | Tue Jun 23 14:58:38 EDT 2020 | jmelson
This will be in the basement of my home, in the US. I can assure you we do not have 3 phase "outside our building". We do have 7200 V 3 phase a block away, but that would require adding a block of 7200 V feeder and a transformer bank, the power com
Electronics Forum | Wed Jul 01 01:25:58 EDT 2020 | jmelson
> I think the main > issue is the bend radius you can apply to tape > with deeper pockets. Right, on my Philips CSM84, on the larger tapes, I don't thread the tape through the return slot, I let it play out the front of the feeder. The
Electronics Forum | Tue Jun 23 01:04:26 EDT 2020 | kylehunter
Thanks for your thoughts. So it seems then that the temperatures that we're seeing aren't unusual, and just need to sort out the fan issue... @Sr. Tech: Yeah, totally understand the radiator effect. Once the fan issue is sorted, we plan on insulatin
Electronics Forum | Fri Jun 26 06:32:33 EDT 2020 | dltechltd
Dear Victor, We have figured out what caused the error: One of it's MVS ICOS card had parity error (The MC reported that error too as seen in the previous pictures). We could see RED LED Light on the card, and we have pulled out, and checked: PAR_ER
Electronics Forum | Sun Dec 05 17:19:38 EST 2021 | oxygensmd
Szia! Ez nem egyike az aukciós gépeknek Hatvanból? Tápegységek mindkét oldalt jók? iCOS PC és MC PC biztosan működik? Minden kártya működik, nem ment ki vmelyiken a biztonsági zener (18V), mert táp alatt ki volt húzva, majd visszadugva? Minden tenge
Electronics Forum | Thu Dec 09 14:24:20 EST 2021 | dltechltd
Üdv! Köszönöm, már régen megoldódott! Ez a gép nem Hatvanból van, hanem a salzgitteri Boschból. Azóta volt még 1-2 probléma, de most kifogástalanul megy! Jelenleg az EKRA X5 tápegységével bajlódunk már közel 2 hónapja, mert menet közben elszállt.
