Electronics Forum | Tue May 11 07:50:52 EDT 1999 | Graham Naisbitt
| If I clean my assembly and find no visable contamination with the unaided eye, do I need to do cleanliness testing prior to conformal coating? | Douglas, It is highly advisable to test for ionic contaminants because a coating seals in as well as
Electronics Forum | Mon Mar 08 10:44:07 EST 1999 | Matt Stackhouse
| Hello; | | I am looking for general info on backplane assemblies. Any info would be appreciated, but some of the questions that come to mind include: | | -What part types other than connectors do backplane cards have on them? SMT? Leaded? Qua
Electronics Forum | Wed Aug 19 12:20:24 EDT 1998 | MARK J.
| Hi there, | I'm actually facing a lot of trouble with PCB's presenting up to 3mm of bow /twist at reception i.e. before assembly. The PCB size is 220 by 230mm. The boards are to be assembeled SMD double sides with 05.mm pitch on both sides. In orde
Electronics Forum | Tue Aug 28 13:46:46 EDT 2001 | mparker
To clarify on "Opportunities"- With 1000 components, the opportunities are far greater than 1000. You have 1 opportunity per component for a component defect i.e. bent lead, damaged part, tested bad, etc. You have a second opportunity per component
Electronics Forum | Tue Oct 12 08:41:23 EDT 2004 | davef
We do not outsource assembly of our product, but we have discussed it. So, until other fine folk at SMTnet respond, we thought we�d rattle on for a while and maybe inspire some other chatter on the topic. As we understand it, you: * Currently contr
Electronics Forum | Thu Sep 01 18:53:08 EDT 2005 | Board House
Pr. I agree with some of the above responses. if you are seeing Delam issues with incoming PCB's the following should be check. 1) Check the OEM Print to what Material they are calling out to be manufactured with. 2) If they are calling out for S
Electronics Forum | Tue Apr 24 18:21:30 EDT 2007 | flipit
Hi, The verbiage states lead finish on components and not solder used in assembly. I have found nothing that states that Swatch got an exemption. Although the 650 micron pitch spec seems to have come from the data Swatch presented in their execpti
Electronics Forum | Sat Oct 22 22:10:09 EDT 2011 | unisoft
Hi maybe this will help Rich larue rlarue@unisoft-cim.com ProntoGERBER-CONNECTION ( http://www.unisoft-cim.com/gerber_connection.htm ) imports raw Gerber data and allows the user to add intelligent information to the shapes on the display and c
Electronics Forum | Sun Sep 03 10:05:36 EDT 2017 | unisoft
Hi Unisoft's ProntoGERBER-CONNECTION should help you. ( http://www.unisoft-cim.com/gerber_connection.htm ) -------------- ProntoGERBER-CONNECTION ( http://www.unisoft-cim.com/gerber_connection.htm ) imports raw Gerber data and allows the user to ad
Electronics Forum | Tue Jan 30 18:25:25 EST 2018 | aqueous
This is one of the most common questions I get asked. Why clean no-clean flux. It was stated earlier that no-clean residues are benign. This may or may not be accurate. It depends on several factors including the reflow process. In a perfect world, t
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112