Electronics Forum | Fri Jun 02 13:05:42 EDT 2006 | stempfle
Efren, Most of the previous posts offer valuable information. Certainly you should consider panelization of the individual circuits. Otherwise you'll waste valuable production time passing 3" boards along the line. Your orig estimate of min thruput
Electronics Forum | Mon Jun 05 14:01:48 EDT 2006 | Brian
I have used, Siemens, Juki, Fuji, Universal, and Assembleon. All of them can do the job, depending on the machine mix selected. I personally prefer MPM screenprinters, after using both DEK and MPM. BTU, Vitronics, Heller, and Ellectrovert all make
Electronics Forum | Wed Jun 14 11:37:44 EDT 2006 | shawnvike
find the problem? Were the parts failing > electrically? Or did someone start prying them > and decide they were too weak? Originally found the problem going through some older assemblies that had failed testing. Poked at leads and found them no
Electronics Forum | Thu Sep 14 13:13:29 EDT 2006 | Kevin W. Parker
I am a tool and process engineer responsible for the cleaning system at Siemens VDO in Huntsville, AL. I have been over this area for more than 8 years. We use EMC Cyberclean 3000RF spray in air cleaners with Zestron SC202 chemistry. At this facil
Electronics Forum | Sun Aug 13 00:28:39 EDT 2006 | Ola
Hi, This is very interesting!!!! I work for a company that have recently (2 years back) been extremely difficult to just order such ridiculous thing as o-rings or screws or lubricants, from local vendors that are not within our companys "approved li
Electronics Forum | Mon Aug 28 17:04:52 EDT 2006 | Board House
ImSn - Immersion Tin - Not Recomended- short shelf life ImAg - Immersion Silver - Prefered Surface finsh by most Board houses, Best reworkablility, 12 moth self life, ENIG - Electroless Nickel Immersion Gold - Second Choice for Board Shops, 12 -
Electronics Forum | Tue Oct 17 17:17:17 EDT 2006 | rgduval
I'm in the middle of developing an ESD program at my company, trying to adhere to S20.20 as much as possible (and the suggestions of the ESD audit conducted before I got here). I've been discussing the pros/cons of pink-poly foams and black foams.
Electronics Forum | Fri Dec 08 02:40:45 EST 2006 | Mike Konrad
Hi 'K', We manufacture both batch and inline defluxing equipment so we have no axe to grind with either technology. There are pros and cons associated with both technologies under specific conditions. Batch machines are typically good cleaners but
Electronics Forum | Sat Dec 30 19:02:19 EST 2006 | mika
This type of component packages works best with vision type: 254 - irregular. Measure the total package length including the leads. Also set the body dimension x-y tolerances to at least 0.35mm and the the pick up x-y tolerences to 0.5mm in the part
Electronics Forum | Thu Jan 04 15:39:07 EST 2007 | dyoungquist
While the 85% yield on a per board basis seems low, we are actually running over 99% yield on a per solder joint basis as there are about 17,700 joints per panel. On average, 9 out of 63 boards in the panel need rework. Rework issues include missin
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112