Electronics Forum | Tue Sep 26 04:41:22 EDT 2006 | Rob
The low cost option would be to buy an old Electrovert with a spray fluxer & fill with SN100C. Saves cost of conversion, and you can pick up old, decent machines very cheap. Talk to whoever sells SN100C where you are in the world and go see some cus
Electronics Forum | Fri Sep 22 09:17:17 EDT 2006 | Roland Girouard
Thank you for your input -good timing! We here at SMTnet had a meeting yesterday to discuss the forum speed issues so we will be addressing that concern soon. We'd appeciate any other feedback, suggestions and/or functionality requests you have. Ro
Electronics Forum | Fri Sep 22 11:42:07 EDT 2006 | Steve
I agree with one of the previous posters that phpbb is a great forum software. Tons of features and it's easy to manage. I also believe that we are very fortunate to have this free forum. I've grumbled under my breath a few times about the load times
Electronics Forum | Fri Sep 29 17:25:28 EDT 2006 | bman
One of the coolest things I've seen in a forum is a preview of the post that you get by holding your cursor over the post title. The only place I've seen it is here: http://monster.traxxas.com/forumdisplay.php?f=48 Probably asking a bit much, but
Electronics Forum | Fri Sep 22 08:37:54 EDT 2006 | Rob
Hi, you want something that will not break down, and something not American then. I would look at the Fuji XP-143E (if you are not going bigger than 20mm x 20mm) or the Juki then. Also I would look at what they are predominately using in Turkey, as
Electronics Forum | Fri Sep 22 14:07:29 EDT 2006 | realchunks
I think Sr is right. Miss prints are prolly a result of your tooling moving the board after the camera looks at the fids. It also could be the camera itself hitting the board from warpped board or tooling raising the board up. It may be the camera
Electronics Forum | Mon Sep 25 09:47:34 EDT 2006 | SWAG
Not sure if this will help at all but you might try doing a lighting histogram test/adjustment since you have a new camera. It could be that your lighting is very bright or too dim and the camera is confusing features next to your intended fiducials
Electronics Forum | Tue Sep 26 08:42:49 EDT 2006 | aj
me and my big mouth. we are currently running a leadfree product and I am getting MCSB on all 1210 caps. Using homeplate with 10% reduction 6thou stencil. I contacted my stencil supplier to ask for advice- they are looking into it but he did menti
Electronics Forum | Tue Sep 26 12:01:30 EDT 2006 | sliebl
We have solved our MCSB problems by using standard homeplate designs on all of our resistors and caps. I use a 50% taper and have achieved great results with 0402-1206 parts using both tin/lead and SAC305 paste. We use Amtech paste.
Electronics Forum | Mon Sep 25 09:42:51 EDT 2006 | slthomas
It sounds like it's just failing the laser align step. Try changing the align type for the part to "2" and see if it places it. If it's failing the laser align and you have valid part dimensions I can't help much but you might consider opening up th
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112