Electronics Forum | Fri Oct 18 07:10:40 EDT 2019 | bk
The lock is manually being able to twist into the lock position and unlock by twisting in the opposite direction. I highly doubt that this is the real problem. First check the rings on the tool to see if they are too worn to hold in the mount head. S
Electronics Forum | Wed Oct 23 13:01:11 EDT 2019 | compit
I have a single-view camera on a Topaz-X machine. When I define a connector type element - it displays messages like in attached files. If I change the type to IC - no problem. There is also no problem when "learning&quot
Electronics Forum | Mon Oct 28 21:56:56 EDT 2019 | sarason
I presume you mean at microwave frequencies. If not get it right in the CAD. Programs such as Microwave Office and VSS make it easy. Also Ansoft, Keysight Eagle etc. Having used MO and Eagle I would heartily recommend them. In the bad old days one tr
Electronics Forum | Tue Oct 29 21:27:21 EDT 2019 | aqueous
It depends on the flux type. If it's water soluble, it should be cleaned soon after reflow because OA flux remains active after reflow. If it's rosin or no-clean (low-residue), then the only concern is the longer wait time, the more difficult it will
Electronics Forum | Thu Oct 31 13:46:40 EDT 2019 | johnce
Hello, I have searched the forums for this specific topic, but can not find the clarification I would like. I am setting up a baking system to "reset" SMD components using a vacuum-bake oven. According to the JEDEC-STD-033 standard, depending on th
Electronics Forum | Thu Nov 07 16:02:06 EST 2019 | kylehunter
OK, got a lot of information today doing some testing.. Version number:- 07 SP11 (985 B02) Released Dec 8 2006 I did the tool(less) calibration of the squeegee height, which worked fine, no error. Did a test print, as you can see from the image, t
Electronics Forum | Sat Nov 09 19:10:18 EST 2019 | richardcargill
Hi, I just set one of these up a month or so ago, so it's all pretty fresh. The 265s have a pressure sensor amplifier box that needs calibration using the OEM calibration jig. OR you can use a 3 quid digital luggage scale from Ebay. The calibratio
Electronics Forum | Sat Nov 09 19:35:25 EST 2019 | richardcargill
the issue is the calibration. What you set it for has to match what it actually reads or you get the error screen at the end of every pass. If you go into the maintenance menu ( using the key next to the system button ) you can check that the pressu
Electronics Forum | Sat Nov 09 20:00:24 EST 2019 | richardcargill
Yeah, sorry, just noticed that bit on the photo. I'll have to have a look at my machine on Monday to see if there's anything that might explain it. The pressure system is pretty much the same on all the 265 variants so if you can find a service manua
Electronics Forum | Mon Nov 11 20:26:37 EST 2019 | kylehunter
Alrighty... Problem solved - ended up not being a problem at all. So, what I didn't realize, was that the knead pressure was 5kg, and the first print was always kneaded, so that's why the set pressure showed 5kg. After it was done kneading, the set
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112