Electronics Forum | Fri Feb 04 13:36:22 EST 2011 | rodrigo
Hi all, Why doesn't the ATT teach all the same part numbers some times? The PCB I'm working with has several resistors 0805. I place the footprint over the part and sometimes it goes to all resistor of the same part number. But then I teach another
Electronics Forum | Mon Feb 07 14:25:43 EST 2011 | rodrigo
Hi all, This machine is pretty good. Thanks to all that have been helping me out with this. I have another question ... Some PCB have footprints that are a bit larger than the actual part (0805, 0603) so they move when they go through the reflow ove
Electronics Forum | Mon Feb 07 18:12:56 EST 2011 | eadthem
I do not know what software version you have, but on older versions it is best to have a mounting inspector set to be the primary and then mask out all labels and solder so it just locates the part. Then add another mounting inspector for looking at
Electronics Forum | Tue Feb 08 10:25:46 EST 2011 | remullis
Michelle, It's been years since I worked on these machines and mine were CS400E's. The next time this error comes up instead of powering down Unplug the RS232 cable that links between the PC and the processor board in the machine, I cant remember if
Electronics Forum | Tue Feb 08 14:23:47 EST 2011 | dennisfo
Conformal coat bubbles using 1B73 and SC-205 nozzle I've read most of the posts on this subject. I'm using the SC-205 (airless) fan nozzle and 400 needle to apply 1B73 mixed with xylene thinner. I have micro bubbles which come directly out of the noz
Electronics Forum | Sat Feb 12 13:19:27 EST 2011 | tpappano
A simple trick I read either here or on another P&P forum is to use "Silly Putty". Place a small thin spot of Silly Putty on the top of the front conveyor rail, and put the machine in "manual" mode. Steer head #1 over the putty and lower it, leavin
Electronics Forum | Tue Feb 15 00:27:39 EST 2011 | jeffr
First clean and de-bur the hole in the nozzle, then try it again. If the Head does not pick up at the feeder, then moves to the dump position...it means that the Vacuum Sensor Board has detected that the nozzle vacuum is above the LOW threshold setti
Electronics Forum | Wed Feb 16 01:06:13 EST 2011 | vinitverma
Dear Gabe, Once you have the mount data in the program, you can move the camera automatically to the location by tracing each location one by one. If I remember it correctly it is done by having the location highlighted in the program and then by pr
Electronics Forum | Mon Mar 07 22:40:36 EST 2011 | sarason
I have written an SMT file generator available at http://users.tpg.com.au/sarason/index.html try the YM6021 generator output option, it is very similar to a CSM66 file. The YMxx series file is a little different in format. This should help your file
Electronics Forum | Thu Feb 17 09:35:16 EST 2011 | ravo
Hi everybody, I am here seeking your experience and asking your help, I want to update our SMT production line as I already hace FUJI CP6 and QP242 machines beside GL2 and oven our new product including 60 components 0402 (1mm*0.5mm ) and 2 BGAs w
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112
.gif)
