Electronics Forum | Fri Apr 04 13:03:00 EDT 2014 | jyo_409
What is the inspection procedure How to test leakage current Is 100% checking is required at IGI inspection What is the shelf life of the capacitor How much period shelf life is recommended for these capacitors How to check the ripple current of thes
Electronics Forum | Tue Apr 08 08:01:35 EDT 2014 | cyber_wolf
So we had a ringblow pump blow up in our CP642. We replaced it and now we are getting hardware NG errors very intermittently.(2-4 times during and 8 hour shift) I see that the x-motor fan, cam motor fan,and oil cooler are all in this circuit. When i
Electronics Forum | Thu Apr 10 15:27:26 EDT 2014 | superlen
I thought I'd clarify "Optimized" a little more as well. The Optimize function on the machine as well as in EasyOLP (if I remember EasyOLP clearly) will calculate the optimum order of the feeders and placements on the machine based upon the types o
Electronics Forum | Tue Apr 15 11:58:20 EDT 2014 | superlen
Sarason, I will send you some samples. Note, however the .pcb file has a LOT more information in that just placement data, it has vision code definitions, part specific fields such as number of pick retrys, pickup/placement delays, speeds, feeder xy
Electronics Forum | Mon Apr 14 20:13:40 EDT 2014 | davef
So, someone is going to get a chance to buy a nice and shiny oven, eh? Summary from my notes of old thread on SMTnet: Some people melt sugar and use that solution to clean cooked-on flux residue. Dissolve sugar into warm water, spray it on the area t
Electronics Forum | Tue Apr 15 15:12:50 EDT 2014 | bradlevy
Thanks Bob. I just didn't have enough experience with production SMT (vs hand-soldered prototypes) to know how finicky some things like this are. I've tried to do a lot of reading, but I haven't seen much that talks about things like this. I also hav
Electronics Forum | Thu Apr 17 04:57:54 EDT 2014 | eoghan
Hi all, I posted this about a fortnight ago so apologies for reposting but I'm not too sure what else to do as I've searched everywhere. I've got an older Jot router J501-21 that has had a hard-drive failure and operating software is gone. I've been
Electronics Forum | Thu Apr 17 11:59:59 EDT 2014 | briantmc
Hi all. A "newbie" on the forum, hopefully someone can help! I have a Quad IVc that has developed a problem on its Theta Axis. In performing the Homing routine it does not spin the nozzle through 360 deg as it should. It does a small turn ~45deg o
Electronics Forum | Thu Apr 17 16:55:32 EDT 2014 | bobpan
Hello, The only thing i can think of is the x&y ribbon cables. I know you said they are good but they could have an intermittent break. I would get a spare set and plug them in with the machine at a slow speed setting and see if it works as normal. A
Electronics Forum | Thu Apr 17 17:57:13 EDT 2014 | proy
Hello We use a 5 zone conceptronics HVN70 and never before have we had something we could not do including 6 layers Rohs complicated boards. Recently we had a larger - simple 2 layer board - all 1206's etc however there are 15 pcs of a LARGE high m
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112