Electronics Forum | Mon Oct 21 11:25:16 EDT 2019 | mendezt6
It sits flush in the bank and twist fine. The open and close are the 2 tabs on the tool bank right? When it’s closed the tool is twisted so it can’t pull up and open is the opposite?
Electronics Forum | Mon Oct 21 14:45:14 EDT 2019 | compit
Show this drawing because we know nothing. At the end I put on the button - downstream is a "closed contact" signal.
Electronics Forum | Mon Oct 21 15:14:53 EDT 2019 | compit
As you can see in machine B on pins 1-2, the circuit closes - give the button / contact here. The voltage you provide most likely applies to pins 3-4. In my (and in the SMEMA standard) it looks like this:
Electronics Forum | Mon Oct 21 03:27:15 EDT 2019 | btkhoo68
we would like to monitor ASM siplace feeder, cycle time, nozzle.event using SCADA. Anybody able to provide memory address allocation for above data value to read by SCADA
Electronics Forum | Mon Oct 28 21:17:40 EDT 2019 | sarason
The OCD in me suggests you chase down Windows Time/Date configuration ,also when you power up the machine check the time/date in the BIOS I presume these machines are windows based just looking in the Assembleon website. sarason
Electronics Forum | Wed Oct 30 13:43:17 EDT 2019 | emeto
This should be fixed by someone who has access to Windows on these machines - probably ASM engineer. You are right to be worried about traceability. Also changing this time might lead to much more issues underneath, so don't just change it before ask
Electronics Forum | Tue Oct 22 14:43:20 EDT 2019 | kathylci
Looking for someone to speak with regarding a Koh Young 3030VAL. Want to find out some information on the ease of programming for this unit. Any help is greatly appreciated! Thanks- Kathy
Electronics Forum | Tue Oct 22 20:34:25 EDT 2019 | richgreen01
I have a mydata TP11 and have done a layout and have one pcb added, i want to know how to add 10 pcb's in to this panel/layout without going through each one manually. Regards Richard
Electronics Forum | Wed Oct 23 02:08:21 EDT 2019 | bukas
sounds like bad electrolytic capacitor, check if your drivers have any swollen capacitors or otherwise damaged caps
Electronics Forum | Wed Oct 23 15:22:11 EDT 2019 | bk
There should be some other error message also with the hardware initiation error. This will help us narrow down your problem
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835
