Electronics Forum | Mon May 13 11:05:49 EDT 2013 | shankar2013
I have moved the MOT cards. The messages are still the same. Booster +25V is stable, The BM3 +25V indicator shows no +25V which means any of the feeds down the chain pulled it down. So basically once it is low the relays in the BM3 card will not latc
Electronics Forum | Wed May 08 14:24:22 EDT 2013 | wahahasteven
we are using acrylic conformal coating on the PCB. Under the same program, same parameters (not changing anything on the machine), and we always found one or two boards have some spots which are not coated (shown as picture). The location of the spot
Electronics Forum | Thu May 09 23:06:09 EDT 2013 | anvil1021
Well we never expected be kicking this horse but, I need some input from the largest group of assembly experts that I know of so, How is life after the initial learning how to program and debug and shock of changing to a new AOI platform or type etc.
Electronics Forum | Fri May 10 11:55:11 EDT 2013 | rway
These discussions have taken place before. I you search the SMTNet forum for "rules based" or "pattern matching" you can probably find what you are looking for. Here is one thread. http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFAp
Electronics Forum | Fri May 10 11:50:00 EDT 2013 | jmrbb
I'm looking for a pdf version of the instruction manual for this model stencil cleaner. We plan to put it on a local server in order to make the information accessible to everyone involved in its use. If you could point me in the right direction and/
Electronics Forum | Fri May 10 13:00:12 EDT 2013 | anvil1021
Hello again, another previously covered topic I am sure,but do AOI systems need to have angled cameras? I have my own thoughts on this but I would like to hear what the consensus with the SMTNET population might be. Thank you and Happy Friday....AN
Electronics Forum | Fri May 10 15:02:28 EDT 2013 | dontfeedphils
In my experience, no. There are some uses for angled cameras (I've used them for inspecting off marks like notches out of LEDs for polarity), but I never found the results repeatable enough to warrant using the angled cameras over the standard, stra
Electronics Forum | Fri May 10 20:37:36 EDT 2013 | dman97
Does anyone have a copy of USOS 1.4.4 for the GSM1 machine? I have a vintage 1995 GSM machine that needs to have its software reinstalled but I dont have the floppy disks that came with the machine. If anyone can help please email me @ thunderkid_l
Electronics Forum | Tue May 14 08:08:04 EDT 2013 | emeto
Hi, BGAs should be placed by camera recognition if you have one(that helps to eliminate defects as missing balls...). If you don't, check the parameter for the laser level(height). In your case I think you should use the body as a measure level. If
Electronics Forum | Tue May 14 16:23:12 EDT 2013 | emeto
Hi again, yes you have to pick the laser level sometimes. The machine will put some default level based on the component dimensions, which sometimes will be wrong for your part. Unfortunately it has been awhile since I worked with Juki so I can't te
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835
