Electronics Forum | Mon Aug 31 06:26:44 EDT 2015 | piyakorn
Hi At our SMT mounting found battery clip stick in the reel pocket and some dropped under pick&place machine from the nozzle can not pick out the part which got recommendation should change the nozzle type from standard placement to be clip sho
Electronics Forum | Tue Sep 01 10:55:41 EDT 2015 | emeto
Hi, 1. Take a multi meter and measure the voltage - I assume it is a DC motor(probably 24V). If you don't, check power supply,cable, relays and Driver for the motor. If you do have voltage, check sensors(sometimes sensor activated may stop your con
Electronics Forum | Tue Sep 01 17:44:46 EDT 2015 | abisson
Hello to All, Is someone can refer me to an IPC standard where the maximum allowance of pcb stretch is mention? I've look into IPC-600, or 2222 or 2615 and I cannot find what I'm looking for. I will like to implement a pass/fail incoming inspection
Electronics Forum | Fri Sep 04 09:11:10 EDT 2015 | sumote
Who do you all use for your transformer needs? Some parts may be COTS, but for the most part custom winding would be needed. High voltage, low current AC primarily, but some DC as well. Quantities sub 1000, but with long-term agreements. Any reco
Electronics Forum | Sat Sep 05 16:09:10 EDT 2015 | emanuel
Need assistance - I want to disconnect an unused LCS module from an Emerald machine. I disabled the tray changer and buffer conveyor in the machine's configuration but I still get an L212 error on the bottom of the screen and the machine hangs during
Electronics Forum | Thu Sep 17 10:18:54 EDT 2015 | huske
What model do you have? Are you working with a Midas only or Hydra as well? Are you looking for basic information on how to get started with chips and SO's? Or like how to use auto-teach or manually measuring parts and programming or more like select
Electronics Forum | Wed Sep 09 14:01:12 EDT 2015 | frankxx
Hi. I'm from germany . I have an car dvd Entertainerin ment system. There is a pcb board for lcd . On this board a smd brocken This is an ic with 5 pins on the top is D9CA. I dont know it. And i didn't found it on google. The lcd are only withe th
Electronics Forum | Thu Sep 10 10:04:27 EDT 2015 | emeto
1. Automated optical inspection(this is a machine that checks for you using camera and software algorithms for recognition) 2. Electrical test. For any PCB a test device can be made. A standard one will look like this: Put the board in the device. Go
Electronics Forum | Fri Sep 11 17:02:10 EDT 2015 | adeanda74
Simon, Normally that error is caused by a bad motor but also there is a possibility that a driver board or even the servo board are defective and last but not least check all your cables and connections. finally let me mention that you can also recei
Electronics Forum | Mon Sep 14 08:10:34 EDT 2015 | iamera
Hello Our production face a problem where our board after etching become shrinkage till 0.09mm but sometime it can be till 0.18mm. this happen after etching still the beginning of process not count for silver through hole and carbon process where th
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835
