Electronics Forum | Wed Feb 08 17:31:23 EST 2023 | stephendo
This is the normal way. https://www.usconverters.com/index.php?main_page=page&id=61&chapter=0 Yours could be non-standard. My memory had said, 2 to 3 and 3 to 2 and 7 to 7. But other pins are assigned in the standard. I don't know if all are alway
Electronics Forum | Fri Feb 10 05:34:55 EST 2023 | ysundar71
Thanks for the comments. As per D Revision of J STD033, clause 5.3.3.2: Dry cabinet at 5% RH SMD packages not sealed in a MBB may be placed in a dry atmosphere cabinet, maintained at not greater than 5% RH. Storage in these dry cabinets may be consid
Electronics Forum | Tue Feb 14 16:31:16 EST 2023 | yannick_herzog
Hello, we have increased problems with a product with the paste pressure. Here we can see pads that are not completely printed. We suspected that the squeegee speed was too fast and the amount of paste on the stencil was insufficient. Unfortunately
Electronics Forum | Wed Feb 15 14:48:40 EST 2023 | proceng1
These guys said most of what I was going to say. I'll add this. Do you notice a difference when the print is front to back, vs back to front? Are the voids still there, just on opposite sides? Do you notice that this happens more for the first co
Electronics Forum | Wed Feb 22 21:21:09 EST 2023 | cbeneat
One expense reduction is to order parts from SMTXTRA. I am not affiliated at all with them; however, I buy from them as much as possible. Usually 30-40% price difference from Panasonic. Example is the waste bins for Panasonic NPM's-$183.49, Last time
Electronics Forum | Mon Feb 27 11:55:58 EST 2023 | dontfeedphils
It depends on how you plan on loading the programs the next time. I used to always send the programs to the machines from the main IS program, but if you just want to load programs from the machine (assuming your programs don't require updates) then
Electronics Forum | Tue Feb 28 13:28:29 EST 2023 | markhoch
If you decide on an epoxy floor, make sure you use a contractor that is experienced with installing ESD epoxy floors. The epoxy needs to be continuously mixed to keep the media consistent throughout. We had a contractor who failed to do that, and wh
Electronics Forum | Thu Mar 02 19:54:51 EST 2023 | oxygensmd
The question is, the motor is working or not? Moves, does anything? Seems to be endswitch not working if moves and you heard beaming sound - like motor moving but its on mechanical endpoint. If I were you, I bet on a limit switch is defective under
Electronics Forum | Thu Mar 02 20:33:31 EST 2023 | oxygensmd
There is a worning parts inside the coupler, if worn the coupler miss the accuracy. Second one is the offset mechnic which also can miss the accuracy. Offset mechanic is under the plate (next the operator door). Check it by hand to be stable and be m
Electronics Forum | Sun Mar 05 12:53:08 EST 2023 | dontfeedphils
I actually still have all my docs and software from that time. Just dug through some manuals and found one for "IS - Intelli PD" (program download). Couldn't tell you if this is still what it's called, but this is what we used to send pro
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835