Electronics Forum | Tue Aug 28 11:40:03 EDT 2007 | lloyd
As in the previous reply, When the machine is powered up don't press the start button. Just wait until the software has loaded then go into Sitest (you may need to logon as SERVICE). In the gantry or head menu's you should find the nozzle configurat
Electronics Forum | Tue Aug 28 06:17:11 EDT 2007 | jgrootkoerkamp
I have problems with blowholes during the wave soldering process. I already find out that the stock time between reflow and wave is the most important. The longer the boards are in stock the more blowholes we have. We don't have a climat controlled
Electronics Forum | Tue Sep 11 15:08:11 EDT 2007 | shrek
KRIKIES! If that wasn't a sales pitch, I don't know whut was, me lad. Optimizer is good for DoE's and process characterization, but no substitute for the artform that is wave soldering. When me lads here in Purchasing get PCB's from all over the w
Electronics Forum | Thu Sep 27 10:53:59 EDT 2007 | gregoryyork
Joris, > > Yep, very common to have those small > blow holes in lead-free alloys. We used to get > them very consistently on white-tin finished > boards, and less frequently with gold finished > boards, for what ever that is worth. > > IPC-6
Electronics Forum | Thu Aug 30 11:02:51 EDT 2007 | gmoritz
... talking two-lead LEDS with 2.5mm pitch ... Yes. That's what we are working with. > are the LED terminals shape were Square or > the naturally rounded? Some are round. Some are square. One is U-shaped. > Due to different insert rotations,
Electronics Forum | Thu Sep 06 10:17:44 EDT 2007 | slthomas
"When the head rotates, it rotates about the center (long) lead of the bug. Therefore, the x/y position of that lead does not change as the head rotates." Heh-heh. You'd think so, wouldn't you? Have you observed this with a magnifying glass? What
Electronics Forum | Wed Aug 29 08:59:35 EDT 2007 | knutgaube
Servus! I am currently producing Low volume/high mix on Panasonic CM401-M using PanaPro. For optimzing changeover I am thinking about buying the PanaPro DSM module. We use a self made program at the moment, but it sure is rather a "bettering" than a
Electronics Forum | Thu Sep 13 06:26:01 EDT 2007 | chrispy1963
Yeah Sr., MyData is definately proud of their parts which shows in their pricing. We use outsourced parts where ever available. Belts for Ywagon tables, conveyor drive belts, ect.... We finally got a break on the tooling though! Finally found a way
Electronics Forum | Fri Aug 31 00:28:09 EDT 2007 | itaig1
We are currently looking at buying a vapour phase reflow batch oven. We currently use an IR convection batch oven and want to know if there is any advantage in switching over to vapour phase?. I've heard that tomb stoning is a common problem do t
Electronics Forum | Tue Sep 04 03:10:35 EDT 2007 | chrispy1963
We've got 2 lead free lines running at present and one leaded. Our lead free pallets and stencils were both leaded before changing over. Just take care to remove any built up flux from the pallets as well as hidden leaded solder deposits prior to r
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835