Electronics Forum | Mon Jul 06 14:54:36 EDT 2020 | dwl
The pictures are kinda fuzzy so its hard to tell of the center pad is electrically connected to anything. If it's not, if its just here for mechanical stability, then you're probably fine. The other thing to make sure of is that both switches are th
Electronics Forum | Mon Jul 06 21:16:59 EDT 2020 | raoult
Thanks guys for your help. Sorry for the pic quality, the device is so small I had to zoom a lot with my phone. The switch is a tactile one, the plastic body is missing, and what you can see in the center is where the contact is made : when the swit
Electronics Forum | Tue Jul 07 14:56:47 EDT 2020 | jmelson
Yup, it does. One is laying on it's side on the back feeder rail, pointing outward, in the first picture. The other is pointing upward behind the vibe feeder on the front feeder rail, in the 2nd picture. Thanks VERRRRRY much for ID'ing these parts
Electronics Forum | Wed Jul 08 23:07:18 EDT 2020 | tylerrobertson
Hello, Trying to re-purpose a QUAD feeder for delivering small parts to a scada robot. Wondering if someone could help me out with a pinout for the connector. it's 8 pins Feeder is p/n 12/10-23959B SSA Was able to get the board to power up and flas
Electronics Forum | Tue Jul 14 15:26:06 EDT 2020 | dekhead
Not as straightforward a question as you might think... due to the multiple rail systems (at least 4) used on Europa. But what you seem to be describing is the single stage conveyor, which uses same belt as used on the GSX, and majority of Horizon /
Electronics Forum | Tue Jul 14 07:23:50 EDT 2020 | researchmfg
There is a misunderstanding that people think the IMC layer grows the thicker the stronger soldering strength. The IMC layer can be grown and distributed evenly at the interface location will be good enough. Once the IMC layer grows too thick and ove
Electronics Forum | Sat Aug 08 23:38:06 EDT 2020 | jmelson
Well, the machine is here, it has some probems that I need to diagnose, and now I ***REALLY*** need the manuals (both maintenance and operations). Two problems. One is that it will only come "ready" (servos powered on) ONE TIME per day! I'm totall
Electronics Forum | Tue Jul 21 14:44:42 EDT 2020 | mcbasol
Dear Evtimov, Thank you for reply. We have decided to buy MS-11 3D due to competitive price and technical service in Turkey. Also, the technical information is quite good. Another reason that we eill buy Panasonic SPG2 Printer, too. Panasonic is solu
Electronics Forum | Tue Jul 21 11:42:32 EDT 2020 | charliedci
I have been tasked with finding the equipment necessary to fully automate our TH assembly. Currently about 98% is performed manually on stuff lines with the other 2% using a 30 year old axial inserter. I am asking if anyone else has gone down this pa
Electronics Forum | Wed Jul 22 15:08:29 EDT 2020 | gregp
How about Semi-Auto insertion. Only one type of machine needed to insert virtually any through hole components. The CS-400E was originally manufactured by Contact Systems and now Versatec is offering remanufactured systems...completely rebuilt to t
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835