Electronics Forum | Tue May 10 09:45:53 EDT 2011 | veeckm
After changing mod codes 50,51 and 54,55 respectively on the HHT I will then goto ccconfig.sys file in the central controller software and manually enter in the new mod code values. I do not do any uploading/downloading of mod codes through database
Electronics Forum | Tue May 03 21:14:19 EDT 2011 | davef
Can we talk some to better understand the scope and breadth of the problem? * From your picture, it looks as if the problem shows-up on some pads, but not others. Is this accurate? * Is this lot related? * Is this related to a few items from a lot? *
Electronics Forum | Fri May 06 09:33:22 EDT 2011 | jimlas53
RLM, you have been very helpful! Let me try this on you: We have two IVC's, one with a conveyor and Quadalign, the other with a workholder platform and Cyber-optic. I just ran the first successful assembly on this second system, but the extents had
Electronics Forum | Wed May 25 17:58:07 EDT 2011 | rssimmons
The SimmScope is a first article inspection system that uses an overhead digital microsope on a motorized gantry to inspect the board - much like an AOI - except that it does not automatically make the pass/fail decisions. It is up to the operator to
Electronics Forum | Wed May 25 17:48:31 EDT 2011 | rssimmons
The SimmScope is an inspection system that uses an overhead digital microsope on a motorized gantry to inspect the board - much like an AOI - except that it does not automatically make the pass/fail decisions. It is up to the operator to make the de
Electronics Forum | Tue May 31 16:31:02 EDT 2011 | xray
Hi, Besides the 2 machines mentioned which are part comparison machines that require the operator to provide a pass/fail on each ref id, there is a system called the FA Inspector which offers the mode described above and two additional modes: 1. Au
Electronics Forum | Tue May 24 13:18:43 EDT 2011 | leemeyer
We had a Quad 4C that was fitted with a dispensing nozzle. It was perfect for jobs like this. Place the 1st component in the paste, add a dot or 2 of paste to the top of that part and then place the 2nd component on top. I beleive that you may be ta
Electronics Forum | Thu May 26 11:21:14 EDT 2011 | asksmt
Hello Guru's, I am using IPC-7351 LP Calulator to design Footprint (0603, 0805, 1206, SOT-23, etc) for all SMT Parts. Our Production Recently commented that they have included Red Glue Machine inhouse and will use Wave Soldering for Both Thru-hol
Electronics Forum | Tue May 31 14:23:16 EDT 2011 | gosswald
I bought an “as is’ Quad IIC package a while back. The machine definitely has issues with the Quadalign Board. The ICs were literally falling off of the board. I am guessing when it was manufactured they did not get the PC board quite hot enough or s
Electronics Forum | Thu Jun 02 14:57:36 EDT 2011 | davef
We don't expect properly soldered first-side DPAKs to fall from the board during second-side reflow. The ratio of weight to solder surface area for a DPAK is 1.32 gm per in^2, which is well within the limit of 44 gm per in^2. [Search the fine SMTnet
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835