Electronics Forum | Fri Nov 05 17:17:32 EST 1999 | NickMata
Fred, The system will base itself on the information within the GF file. In the GF file you provide the description as to the physical dimensions, features, tolerances and handling for the part. Once the component has picked up the image, it is "see
Electronics Forum | Tue Nov 02 17:52:17 EST 1999 | Dave F
Jim: Several points: 1 If you�re correct about corrosion of your component leads (which is entirely possible if the leads are steel, as you say), then the AIM 264-5 no-clean may not be aggressive enough to remove the corrosion you are seeing routin
Electronics Forum | Thu Oct 28 23:45:23 EDT 1999 | DGrenier
JC: Seen this before, many times. We fixed our problems at the co I work for by giving a packaging specification to our purchasing dept. Took some work but the payoff was pretty big. This document includes such things as orientation,pitch,tape type
Electronics Forum | Wed Oct 27 17:27:58 EDT 1999 | John Thorup
well... it might be cheaper. But I think it's a bad idea. First, your operators will hate you by the end of the day with their sore feet, not to mention lost productivity. Second, safety. Even if the plates are connected to ground through a resistor
Electronics Forum | Wed Oct 27 22:58:56 EDT 1999 | Jeff Sanchez
Hany, John is right! How do I know cause I have a metal wire floor. I was faced with the same problem you are faced with now and the price was up there. I had one advantage, My floors where raised wood when we got the shop. This reduced the fati
Electronics Forum | Wed Oct 27 07:38:08 EDT 1999 | Mario
Hi Jerry, I have a solution for you which I have done myself and shown to others which should cost you less than 100$ if you already have a microscope.This is still an operator job and an automated operation. You need two mirror squares (about 4inc
Electronics Forum | Mon Oct 25 14:48:29 EDT 1999 | William
All, I am having a problem with joints being soft after SMT. Especially 25 mil and smaller parts. It seems as though you can slide the leads right off of the solder. It takes only about 30-40 oz. of compression at 45 deg. to move leads off of join
Electronics Forum | Mon Nov 01 11:07:36 EST 1999 | William
Thank you so much Dave for all of your wonderful help. You know, all I really wanted to know was a little more about the gold porosity problem. Since I am not an expert on gold immersion, nor do I claim to be, I just wanted some information so that
Electronics Forum | Wed Oct 27 16:55:38 EDT 1999 | Joe Herz
Jerry, In our house we generally run a glue bottom last but people do it both ways. Our logic revolves around protecting components from being knocked off the board during handling and processing prior to wave solder (this is most important with sm
Electronics Forum | Tue Oct 19 22:43:31 EDT 1999 | Stu Leech
We are deeply involved with this question because we have developed a much faster way to remove moisture from PCB's. PCB's absorb varying amounts of moisture at differing rates. The rate is influenced by the laminate type board configuration , loca
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, USA
Phone: 18002796835
