Electronics Forum: embedded and capacitor (Page 1 of 8)

resistor and capacitor naming codes for smt.

Electronics Forum | Sun Sep 27 10:42:35 EDT 1998 | l atch

I'm looking for a chart that will help me identify smt resistors and capacitors. I have figured out a few on my own. a resistor with the numbers 510 printed on it was a 51 ohm resistor. numbers 221 was a 220 ohm resistor. numbers 102 was a 1k resis

Re: resistor and capacitor naming codes for smt.

Electronics Forum | Mon Sep 28 09:18:30 EDT 1998 | Ben Wilmot

The majority of SMT resistors use the following notation. 10 X eg 153 represents 1k5 resistor The third digit in the sequence denotes the number of zeros to add after the first two digits giving the value in ohms. Many Caps will follow the same nota

0402 resistors and capacitors

Electronics Forum | Tue Oct 02 07:23:37 EDT 2001 | cath

Has anyone caried out a DPM analysis on these components. I would be interested to know the defect rates and other assoc. placement issues as we have never placed them before. Thanks, cath

SMT optimization and improvement

Electronics Forum | Fri Feb 16 11:07:25 EST 2007 | stepheniii

I'm not sure if anyone mentioned the single most important factor. p.m.'s. If the nozzles are getting dirty and clogged it's not going to do a great job of picking parts up. Don't think in terms of variation. It's there it's unavoidable and undet

R and C, non ceramic

Electronics Forum | Tue Oct 12 08:12:20 EDT 1999 | robert parker

any advice on smt resistors and capacitor that can survive an explosive shock. the ceramic smts are not, plastic ic's and discretes do fine.

Printing and Reflow with Ceramics

Electronics Forum | Wed Aug 12 03:43:01 EDT 1998 | Terry Keen

We are taking enquiries for sub-contract work that we hope to be doing by Christmas. One of the enquiries is to assemble chip capacitors and an SO14 onto ceramic. Does the printing process, paste used and reflow process remain the same, or are there

ICT and specifying PCBA testing

Electronics Forum | Tue Nov 01 14:46:31 EDT 2011 | davef

Agilent TestJet Technology White Paper In the early 1990s, the testing of digital parts became problematical. Previous in-circuit test techniques sought to ensure a correct, functioning part by applying digital patterns, called vectors, to the input

Mixing conformal coating and RTV

Electronics Forum | Thu Apr 21 12:35:15 EDT 2005 | jdumont

Well that doesnt sound very promising. What im going to do is make sure these two boards I just coated (with the RTV already cured) will be used in house only. In the future we will do any conformal coating operations before potting with whatever mat

Re: Silver Epoxy and CEM3

Electronics Forum | Fri Aug 28 23:32:39 EDT 1998 | Pete Sorenson

| Does anyone have any experience they are willing to share on Ag epoxy used as a copper through hole plating replacement? Was CEM3 used? | What are the limitations? | Thanks, | Steve I have used silver epoxy extensively for conductive bonding applic

Cracking Capacitors and Solder Balls

Electronics Forum | Mon Jun 08 14:19:30 EDT 1998 | Gary Simbulan

Earl, et al, Boy things get old and cold around here fast. I promised more detail on my capactior problem and I thought I could drop something completely different in the same message and tell a tale of solder balls. First the caps. We still have

  1 2 3 4 5 6 7 8 Next

embedded and capacitor searches for Companies, Equipment, Machines, Suppliers & Information

pressure curing ovens

World's Best Reflow Oven Customizable for Unique Applications
2023 Eptac IPC Certification Training Schedule

We offer SMT Nozzles, feeders and spare parts globally. Find out more
Shenzhen Honreal for all your SMT Equipment needs

High Precision Fluid Dispensers
SMTUnion - About Us

I've got PARTS for FEEDER REPAIR --- Sean at SMTXtra