Electronics Forum | Tue Oct 02 07:23:37 EDT 2001 | cath
Has anyone caried out a DPM analysis on these components. I would be interested to know the defect rates and other assoc. placement issues as we have never placed them before. Thanks, cath
Electronics Forum | Wed May 21 14:47:49 EDT 2003 | radney
On the new 4797 T12W8P feeders we are having trouble picking the very thin chip resistors. Adding foam to the feeder (beneath the pick point) helps, but it only minimizes our frustration. Universal has a reel of these parts and they are looking into
Electronics Forum | Wed May 21 17:11:37 EDT 2003 | radney
Yes to all of the above with the exception of the part sticking. The same parts are EASILY picked using the 4790/91 feeders on a 4790/91 machine. The new feeders just flip the part out when the feeder advances. Thanks! Lee
Electronics Forum | Wed May 21 15:47:34 EDT 2003 | JB
We have an HSP 4796, if the feeder mechanism is the same, this may help you a bit. First make sure that the componet definition is right on the component library. Tape or Embossed. Second, the component thickness vs actual thickness. Is the pick u
Electronics Forum | Wed May 07 15:36:04 EDT 2008 | llaerum
The 483 is what we use on all boards except on one where the 353 improved wetting on resistor packs. It worked much better since the parts are LF and this is the same flux AIM uses in their LF solder. Yes, it was recommended by AIM when we discussed
Electronics Forum | Tue Oct 12 08:12:20 EDT 1999 | robert parker
any advice on smt resistors and capacitor that can survive an explosive shock. the ceramic smts are not, plastic ic's and discretes do fine.
Electronics Forum | Sun Sep 27 10:42:35 EDT 1998 | l atch
I'm looking for a chart that will help me identify smt resistors and capacitors. I have figured out a few on my own. a resistor with the numbers 510 printed on it was a 51 ohm resistor. numbers 221 was a 220 ohm resistor. numbers 102 was a 1k resis
Electronics Forum | Wed Jun 11 08:02:58 EDT 2008 | electronicsrobotics
Can anyone help about Multiport Serial Adapters, 8051 development tools, watchdog timer, Embedded C Compilers,8051 Free Info and Code, Multi Function Timers, World Class 8051 Trainers, PC-based Oscilloscopes and KS0718 C Library? I have gone throug
Electronics Forum | Thu Jan 27 06:39:59 EST 2005 | reash
For now, on this first board, we will be reworking components such as 0805 and 1210 size caps and resistors, along with SOT-23 and SC-70 size packages. We might eventually get into BGAs. This board will most likely be a double-sided board, probably
Electronics Forum | Tue Jan 29 16:54:17 EST 2019 | slthomas
There's always flying probe, although it's not particularly cheap.
