Electronics Forum: ersa nozzle issue (Page 1 of 39)

wave profiling for ersa ews500

Electronics Forum | Wed Jan 11 14:51:05 EST 2006 | j keller

we have a new ersa ews500 wave machine and are experiencing difficulty in profiling for lead free. particular issue is reaching 110c preheat for large TH electrolitic caps while maintaining 110-170c on 1/4 watt resistors in same area

ERSA users 1.8/2.5 nozzle

Electronics Forum | Thu Nov 14 18:51:08 EST 2013 | tombstonesmt

We use a 2mm with our Pillarhouse Jade Mark II. We found that reducing the nitrogen enough that the area around the nozzle stays hot enough not to "freeze".

ERSA users 1.8/2.5 nozzle

Electronics Forum | Fri Nov 15 10:54:38 EST 2013 | jaimebc

Thanks for the pointer tombstonesmt, I'll give that a shot. Being able to utilize this nozzle will help tremendously. I'll post results as they become available.

ERSA users 1.8/2.5 nozzle

Electronics Forum | Thu Nov 14 10:24:53 EST 2013 | jaimebc

Recently, we have been experimenting with the 1.8/2.5 nozzle to be able to solder leads that are near an SMD. This pcbs were not design for selective solder, so we are trying to work within this limitations. I found the 1.8 nozzle very hard to insta

CP6-4000 nozzle centering errors?

Electronics Forum | Fri May 30 09:50:04 EDT 2008 | jdengler

Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry

CP6-4000 nozzle centering errors?

Electronics Forum | Fri May 30 09:53:19 EDT 2008 | cyber_wolf

"Another sticky issue is that if you use after market nozzles especially mixed in with Fuji nozzles the Anti-Marking Illumination Disks can be different enough that the vision system will reject nozzles. Jerry " Thats what I meant when I said they

Melfs drops down from nozzle

Electronics Forum | Tue Sep 05 20:06:08 EDT 2023 | emeto

Not sure what equipment you have, but it sounds like some vacuum buildup issue. You might have some leak, or blockage or vacuum buildup components malfunction.

QP341 Z-Height issue

Electronics Forum | Fri Jun 20 12:03:25 EDT 2008 | mmjm_1099

Can someone please shed some light on a QP picking problem I am having? It seems I am having to add more and more z offsets in the programs and unsure why. I have to go in and add 0.4 mm into the Z pick because the nozzle isn�t coming down enough. Wh

Clogged nozzle detected at NPM W machine

Electronics Forum | Fri Mar 22 15:52:58 EDT 2024 | vsuresh

After cleaning also same issue, replaced by new nozzle also same issue,not cleared

Pick & place nozzle for data switch

Electronics Forum | Mon May 25 20:31:32 EDT 2009 | dcell_1t

wich is the model of the machine you're trying to place this component? what are the placement issues that youre observing. on the IP3 that we place switches we use a 3.7 nozzle (standard) because of the dimensions on the component, the issue that I

  1 2 3 4 5 6 7 8 9 10 Next

ersa nozzle issue searches for Companies, Equipment, Machines, Suppliers & Information