Electronics Forum | Wed Aug 24 12:15:57 EDT 2022 | kumarb
We have the Emerald-X (Yamaha YV88X) and used this article and software for our machine. Working very well. https://www.philscomputerlab.com/gotek-floppy-emulator.html# Perhaps consider the software from the above link.
Electronics Forum | Fri Aug 26 09:39:21 EDT 2022 | compit
The emulator doesn't work that way. You can create only 1.44 MB partitions (e.g. 100 pieces on one flash drive) (with the supplied software) and they will be visible as floppy disks. It is not a USB port.
Electronics Forum | Tue Aug 23 09:52:51 EDT 2022 | jojoled
Can anybody recomend exact model number of USB to floppy disk emulator, which works for sure on JUKI KE7xx series PnP machines? I have bought this one : https://www.gotekemulator.com/P_view.asp?pid=54 and have KE760 machine, but it doesnt work (tried
Electronics Forum | Fri Aug 26 10:55:31 EDT 2022 | kumarb
a DOS USB stack will be required. If Windows -> the USB driver for this device will be required. If Juki has a custom OS then even less of a chance of a success. In all cases, you are introducing far too many layers of unnecessary software that is d
Electronics Forum | Tue Sep 07 11:17:43 EDT 2010 | ysutariya
The only issue is that now you are paying for a 4 layer board and only getting a 2 layer board. In the long run, it will definitely cost you if this is a higher running product. Other than that you shouldn't have any issues.
Electronics Forum | Sat Oct 26 10:12:32 EDT 2024 | madisreivik
Hello ! Please offer some clever solution for the following problem 2 sided assembly. The side which must be assembled first has 2 SMD RJ45 connectors. They have plastic location pins. Which protrude tru the board, about 0.4mm So, when I want to a
Electronics Forum | Tue Jul 06 19:38:01 EDT 1999 | John
Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. Q #2) When speaking of annular rings, I have always thought of them as minimums. Su
Electronics Forum | Sun Oct 27 09:36:38 EDT 2024 | madisreivik
Yes, thats the most obvious solution :) But its a quite specific and densely packed socket, so my hopes are not that high :)
Electronics Forum | Sun Oct 27 14:01:48 EDT 2024 | kirill
Why would you assemble first side with TH component? Can't you start from the second side?
Electronics Forum | Wed Jul 07 09:47:41 EDT 1999 | Peter Brant
| | Q #1) Is it more reliable to have the mask tent over the vias or risk getting vias half filled with solder? These are vias with an .020" hole and .040" or .050" pad. WIth regards to this question, and scott's follow up, I have used the "epoxy me
