Electronics Forum: esd and table (Page 1 of 13)

Granite Surface and ESD

Electronics Forum | Mon Mar 28 09:56:36 EST 2005 | n wolford

We have a granite table out on our production floor. We use the table along with metal parallel bars and a height gauge to measure component height. Some of these boards have components on them that may be ESD sensitive. Does anyone have experience w

Granite Surface and ESD

Electronics Forum | Fri Apr 01 04:51:53 EST 2005 | dougs

I think what Russ is getting at is that the granite table is used for it's flat surface to aid in measurement, the flat surface helps to measure heights very accuratly. If you add another surface on top of that then you lose what the granite surface

Granite Surface and ESD

Electronics Forum | Thu Mar 31 23:14:18 EST 2005 | Steve

Russ if your asking me if covering the surface of the granite defeats the purpose then I'm lost. An ionizer is a very good suggestion but they are not inexpensive. If the table is grounded and the metal bars are on a grounded mat, laminate etc. then

Granite Surface and ESD

Electronics Forum | Fri Apr 01 09:40:57 EST 2005 | russ

Doug you are correct, I was talking about the integrety of the surface for mechanical measurement accuracy, not ESD properties.

ESD flooring and footwear

Electronics Forum | Wed Oct 11 12:37:56 EDT 2006 | realchunks

Rob is right. ESD flooring is "Conductive" which means it can drain ESD from the body. But if you have an insulated shoe, it does not good, the ESD remains on the body. Now if you wear a smock, then you can rub ballons in your hair and touch any

ESD Smocks and chairs

Electronics Forum | Tue Jun 05 20:36:01 EDT 2007 | rfrog

LarryP, ESD smocks in combination with a wrist strap provide a path to ground for any charge potential. An operator wearing a smock while grounded will provide a path to ground for the chair. With an ESD chair you can have antistatic or static

ESD flooring and footwear

Electronics Forum | Tue Oct 10 19:11:58 EDT 2006 | Rfredericks

Hello, I've ran into information claiming that ESD dissipative floor mats and laminate is not effective unless paired with ESD footwear or heel straps. Can anyone confirm or deny? Thanks! -OtheRuss

ESD Smocks and chairs

Electronics Forum | Tue Jun 05 16:39:37 EDT 2007 | larryp

We are looking at ESD chairs in our EPROM room. Currently we are using smocks with wrist straps, this was set up before me. Is there any special or different things that needs to be done to the smocks to make them work with an ESD chair?

Truth Table for and

Electronics Forum | Sun May 22 23:39:25 EDT 2005 | thaqalain

Make truth table for and (A:B,C)

Granite Surface and ESD

Electronics Forum | Mon Mar 28 19:58:26 EST 2005 | davef

We agree with Ken. What does your field meter tell you? Taking it a step further [erzit backward?], what is it about the measurement that requires the granite surface? Wouldn't an ESD protected bench top be as flat as needed for most gauging like

  1 2 3 4 5 6 7 8 9 10 Next

esd and table searches for Companies, Equipment, Machines, Suppliers & Information