Electronics Forum | Fri Nov 12 13:07:45 EST 2010 | G8reflow
Hi, The focal point of my research has been to recommend a reflow oven and develop a process for a small to low-medium production SMT soldering with the following considerations. - Lead-Free - Low to low-medium production - Forced Convection reflow
Electronics Forum | Thu Jan 05 15:30:19 EST 2006 | samir
Pure ignorance is my answer to that.... You're with a CM, right?? Your idiot customer probably has never stepped foot on a manufacturing floor in his entire gott-damn life, but.... he reads SMT Magazine every month, and probably read some article
Electronics Forum | Thu May 18 08:12:22 EDT 2006 | marc
smt You should have no issue using your exsisting oven for both leaded and lead free materials if the machine is capable of delivering the desired profiles. One aspect that makes a "lead free" oven is the design of the system. Ability to reach th
Electronics Forum | Tue Nov 20 17:07:20 EST 2007 | kennyrebbe
I am looking for a new semi automatic Stencil printer, and reflow oven that is capable of doing double sided boards with BGA�s. We currently own a Manncorp 4500R stencil printer https://www.manncorp.com/4x00_stencil_printers/index.php?view=overview&a
Electronics Forum | Tue Aug 18 17:49:16 EDT 2009 | dyoungquist
Is there a limit to how many times a pcb with components can be run through a reflow oven before the components start to degrade? Example: We load the SMT components on the bottom side of the pcb and run it through the reflow oven. Next we load the
Electronics Forum | Sat Aug 10 22:23:10 EDT 2019 | halfslice
Hello, I recently had to leave an SMT job because of the fumes generated from a reflow oven. Smoke poured out of the oven and left a tar-like yellow residue on everything near the input and output side. Its been two weeks since I left that job and I
Electronics Forum | Tue Jun 08 18:25:47 EDT 2010 | smtmax
Hi Danny, Are you doing lead free? If yes, I would consider the AE-R330A or SMT-2010 lead free reflow oven. Our reflow oven is affordable and brand new. Just want to make sure what size is your board. Also, all of our equipment comes with one year s
Electronics Forum | Tue Jul 13 06:49:53 EDT 2004 | imtiaz
In one board we are using 213 SMT components out of which 23 components are lead-free and the rest are leaded. The paste used is also leaded. Do we have to make any changes in the profile of our reflow oven ? Also will there be any negative effect on
Electronics Forum | Mon Sep 12 10:41:50 EDT 2011 | processmxli
Hi All We have run SMT process with SnPb but we’re installing some lead free components like capacitors and resistor lead free. After the reflow oven all components have good appearance with solder join sheen. But the lead free components the solde
Electronics Forum | Thu Dec 26 15:27:22 EST 2019 | emeto
Lead Free SMT 1. Stencil printer Squeegees s -should have Pb free pair 2. Reflow oven - should be able support Pb- free higher temperatures. 3. In case you have inspection table on the SMT line - should have Pb-free mats(usually different color)
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
