Electronics Forum: exec (Page 1 of 3)

Universal sequencer

Electronics Forum | Thu May 17 10:56:03 EDT 2007 | jdengler

Kevin, There are many possible causes. Can you give us some background? Has this exec ever been transfered into this machine from this PC? Do you have other exec's and/or PC's. As previously stated it sounds like a memory issue but could be communic

UIC VCD E-Palm/Limit Switch Fault.

Electronics Forum | Sat Mar 17 14:14:30 EDT 2018 | introlab

Hi . If the machine was not connencted to power ,the battery failed and the controllers exec was lost or corrupted. Check the bettery on J11 controler ,if it is dead this is the case. Change the battery and reload the exec. There is an exec file

Universal sequencer

Electronics Forum | Thu May 17 11:11:09 EDT 2007 | stepheniii

What medium is the exec stored on? Maybe your floppy has a bad sector, do you have a back up copy of the exec or maybe can get one?

Universal sequencer

Electronics Forum | Thu May 17 10:48:20 EDT 2007 | mgrimes

Kevin, As Steve mentioned, you could be running out of memory space - a few things to check: 1. What is the file size and how far does it get when loading the exec back on? Depending on this, you could be out of memory. 2. You may or may not need a

Universal Axial Model 6287A communication

Electronics Forum | Tue Mar 06 07:04:44 EST 2018 | alpha1

If you have the @? you have communication to the controller. If you send me the exec I can tell you if it's the right one. After that take the old battery out and put the one in that reads 3.1. It's probably ok just needs a charge. Once you get a goo

Universal 6421D THTCommunications Error

Electronics Forum | Wed Dec 14 15:26:38 EST 2022 | assuredtech

I'm inclined to think if you have done this procedure before and are doing it correctly, and you have successfully used that computer and comm cable before and you have used that Exec before and have recently proven out the computer comm port and set

Universal sequencer

Electronics Forum | Thu May 24 11:35:54 EDT 2007 | kevinjm

Just to let you all know, switched on machine monday morn, loaded the exec, and,,, it worked. No problems. Thanks for all the replies anyway

8221 controller on an old axial

Electronics Forum | Tue Oct 13 19:15:59 EDT 2009 | fulldrawmike

if you have not turned the halt switch down then back up you can sometimes get a restart using 0(zero)G and enter. If that does not work you will have to load the exec.

Universal 6421D THTCommunications Error

Electronics Forum | Wed Dec 14 14:59:34 EST 2022 | fuji_user_2014

I'm using UIC on a virtual machine. I loaded the exec but it gets stuck at around 100k bytes.

Production Line Setup

Electronics Forum | Fri Jun 07 17:27:50 EDT 2002 | nuezmaster

I am having some diffuculty convincing our exec. staff that by increasing our personel on the floor, we will actually improve our machine efficiency. We currently have seven lines, four of them have two P&P machines in line. At this point there is

  1 2 3 Next

exec searches for Companies, Equipment, Machines, Suppliers & Information

See Your 2024 IPC Certification Training Schedule for Eptac

Stencil Printing 101 Training Course
2024 Eptac IPC Certification Training Schedule

Wave Soldering 101 Training Course
PCB Handling Machine with CE

Best Reflow Oven
Global manufacturing solutions provider

World's Best Reflow Oven Customizable for Unique Applications