Electronics Forum: extreme (Page 1 of 50)

Re: Extremely long subject line

Electronics Forum | Thu Apr 08 10:04:08 EDT 1999 | Michael Bryant

Bob, Thank you for posting an extremely relevant technical question to the Forum. However, the entire message was posted in the subject line and the body was left blank. In the future, please use the subject line to summarize your message, and type

Circuit cam related software

Electronics Forum | Fri May 27 11:12:04 EDT 2005 | Ray

We have switched from Uniscam due to support issues and their ablity to come out with a new USABLE version. We have been running it for close to 2 years now and we have been extremely happy with its performance and their support. Version 6.0 which

Stencil cleaner

Electronics Forum | Thu Jan 24 15:57:43 EST 2013 | ccouture

as you know, alcool is extremely flamable, the vapors are hazardous, prolonged contact with skin is not recommended, etc...

Curious PCB technology

Electronics Forum | Fri Jan 24 16:13:24 EST 2020 | dwl

what does the PCB go into? Is it for use in an extreme environment?

DEK VectorGuard stencil system.

Electronics Forum | Wed Jun 04 09:46:09 EDT 2008 | jseagle

We currently use the VectorGuard stencils and love them. They are so easy to set and remove from the frame and weigh almost nothing. We get very good prints, we do 0402 and 16mil. We previously tried the Tetra system and were not happy due to the

Barrel fill with Pb Free Wave Solder

Electronics Forum | Tue Dec 16 16:49:22 EST 2008 | scottd3

We ran into this problem before, on all of our models. We never quite found out the reason, we do know that if the PCB is passed through a reflow oven that is extremely dirty with evaporated solder paste flux, it will make it extremely difficult (or

Re: conformal coating selection

Electronics Forum | Fri Nov 24 18:27:05 EST 2000 | Darby

Terry, I've never had to deal with conformal coating but I do know that automotive parts manufacturers do a great deal of CC. These are the people that I would be looking to for your answers. Particularly in regard to long term reliability, extreme c

PCB Material selection

Electronics Forum | Wed Jun 21 14:14:43 EDT 2000 | Gary Hunt

I need to construct test boards for which will be repeatedly subjected to Highly Accelerated Stress Screens, (HASS), and am looking for recommendations for materials. Would an Epoxy Glass or an Epoxy Glass Composite be least suceptible to exposure t

MRP Software

Electronics Forum | Fri Nov 19 13:05:50 EST 1999 | Jim Trent

I would like to know what MRP software packages work best for electronics contract manufacturing. If anyone could help me here it would be extremely helpful. Jim

Re: DENDRITES

Electronics Forum | Mon Aug 09 05:05:41 EDT 1999 | Brian

2 �S-cm at the moment of reaching the boards). The boards were tested immediately after cooling and conformally coated, using a PMMA product, with extremely high resistance, reasonable protection and good repairability but, of course, very tender che

  1 2 3 4 5 6 7 8 9 10 Next

extreme searches for Companies, Equipment, Machines, Suppliers & Information