Electronics Forum: fail (Page 1 of 138)

AOI false fail PPM

Electronics Forum | Tue Jul 29 13:27:49 EDT 2008 | jdd

PPM on AOI, this is our metric for false fail on AOI machines. Our target is 1000 ppm but I'm not sure about this target for low volume. (1,000 false fails on 1000,000 of inspections) thanks

AOI false fail PPM

Electronics Forum | Fri Aug 01 08:49:54 EDT 2008 | stepheniii

I don't know about that machine but 5000 wouldn't suprise me. And make sure your targets is less than X false fails with zero false passes. I can probably get zero false fails with any machine but I"m sure a lot of defects would get past that machi

BTU link fail

Electronics Forum | Tue Jun 28 00:11:44 EDT 2005 | ajaydoshi

We do have BTU 150 Paragon oven. Link fail problem occume most of the time during start of day or after Sunday. It never haven while running continiously, Any Suggestion. Ajay

BTU link fail

Electronics Forum | Sun Sep 18 20:42:37 EDT 2005 | Ken

Link Fail is the RS232 connection to the FCU. I would check the connector, cable that plugs into the computer. Verify all power supplies are working. The most likely scenario is this: Computer malfunction Cable / connector issue. Defecive FCU

BTU link fail

Electronics Forum | Mon Sep 19 04:27:47 EDT 2005 | dougs

Check your power supplies, we had same fail a while back on VIP98 faulty power supply was the cause

AOI false fail PPM

Electronics Forum | Thu Jul 31 09:01:32 EDT 2008 | stepheniii

Aren't you worried about false passes? With that low of false fails, you must be only inspecting easy stuff like presence and not checking for correct parts.

AOI false fail PPM

Electronics Forum | Fri Aug 08 13:21:14 EDT 2008 | RobP

With AOI it really depends on what you are testing. Not only what criteria, but what different types of components. We run a high volume low mix application for automotive checking for presense, positional accuracy, and all solder joints. We curre

BTU link fail

Electronics Forum | Thu Jun 30 08:00:07 EDT 2005 | Nirmal

pls check at rear side is there any relay spark or else check the connection between the monitor and the control card

BTU link fail

Electronics Forum | Tue Sep 20 03:22:39 EDT 2005 | ajay

thanks, it was 15v power supply that was giving problem. ajay

AOI false fail PPM

Electronics Forum | Tue Jul 29 13:20:55 EDT 2008 | gabriella

330 000ppm on low volume. what is the parameter you are talking about? PPM on AOI?

  1 2 3 4 5 6 7 8 9 10 Next

fail searches for Companies, Equipment, Machines, Suppliers & Information

Pillarhouse USA for handload Selective Soldering Needs

Training online, at your facility, or at one of our worldwide training centers"
High Throughput Reflow Oven

High Resolution Fast Speed Industrial Cameras.
Sell Your Used SMT & Test Equipment

High Speed Precision In-Line SPI System - Mirtec MS-11
Hot selling SMT spare parts and professional SMT machine solutions

500+ original new CF081CR CN081CR FEEDER in stock