Electronics Forum: fcm (Page 1 of 14)

FCM Base II - option PUSHUP - OFF

Electronics Forum | Thu Mar 22 04:03:04 EDT 2012 | vinitverma

The difference between FCM I and FCM II is not only the use of pusher. The vacuum calibration pads are also in different locations - in front in case of FCM I and in the rear for FCM II. Also the pick positions (coordinates) as well as location numbe

FCM Base II - option PUSHUP - OFF

Electronics Forum | Fri Mar 23 02:33:44 EDT 2012 | vinitverma

Their reply is correct. In FCM II and FCM Multiflex there is NO possibility to enable the pusher.

FCM Base II - option PUSHUP - OFF

Electronics Forum | Fri Mar 23 02:18:37 EDT 2012 | smtronic

Thank you for your response. I did this: I changed the whole machine FCM and the FCM II, as you write me everything changed. Programmed new EPROM, etc. FCM machine and it works perfectly as FCM II. Only now I've changed the option to push mechanicall

FCM Base II - option PUSHUP - OFF

Electronics Forum | Mon Mar 05 13:32:05 EST 2012 | SMTronic

I have a machine FCM Base II FCM II feeders are electric. By default, the manufacturer's option pushup is disabled. It can not be incorporated in any way. I need to use it. Can you turn it on in the configuration files? Do you have access to the FCM

i have to buy one NXT from Fuji What do you think???

Electronics Forum | Sat Dec 18 02:16:23 EST 2004 | vinitverma

Hi Rick, First, in the last 6 months my customers have bought 5 FCM 1s and 3 FCM 2s, from the second hand market and NOT from Assembleon for approx. $130K for the FCM 1 and approx. @200K for the FCM 2. And one customer had bought the CP4 for $10K an

PHILIPS FCM II

Electronics Forum | Mon Aug 02 01:35:31 EDT 1999 | KEVIN SIMPSON

HI EVERYONE, WE JUST BOUGHT 6 FCM MACHINES AND ARE HAVING A NUMERIOUS AMOUNT OF DOWN TIME COMPARED TO OUR 5 LINES OF FUJI EQUIPMENT.IS ANYONE HAVING BAD EXPERIENCE WITH PHILIPS FCM ETC? WHAT PROBLEMS ARE YOU HAVING? KEVIN KEVINSIMPSON@GA.SLR.COM

Re: FCM programming software

Electronics Forum | Tue Nov 03 09:16:10 EST 1998 | Chris Young

What programming software is available for the Philips FCM? I currently use the Philips PPS software, but the user interface is less than desirable. Surely there is something better. Bernie, CIMBridge'97 from GR Software (Mitron-Genrad) has a

Manuals for Assembleon FCM-2 and TECHNICIAN

Electronics Forum | Sun Jun 14 15:40:48 EDT 2015 | csm

Dear All We are looking some Phillips Technician can do programming for FCM-2 equipment and we are looking the Programming manuals and maintenance manuals. Can somebody help us, or can give us support to give maintenance and programming to some FCM

QP-132E // FCM 2

Electronics Forum | cnoonan |

Sun Apr 21 09:51:02 EDT 2002

QP-132E // FCM 2

Electronics Forum | Fri May 03 01:25:33 EDT 2002 | gerits

Dear Sir, I do not want to mix in this "subjective" discussion but as an employee of Assembl�on (buider of FCM II, FCM multiflex 50, 75, 100) I can provide you with MTTR, MTBF, placement data (0201), software, and other (also customer) data on our e

  1 2 3 4 5 6 7 8 9 10 Next

fcm searches for Companies, Equipment, Machines, Suppliers & Information

Europlacer pick and place 50 years anniversary

Best Reflow Oven
Selective Conformal Coating System

High Precision Fluid Dispensers
pcb components vacuum tweezers

Small Parts Tips for as small as 100 microns
smt assembly equipment manufacturer

Thermal Transfer Materials.