Electronics Forum | Wed Nov 16 10:48:23 EST 2005 | aj
Hi, There are a few different types of CP6 which I think the main differences are on the board loading side of things. To briefly answer your questions: 1.What is the actual CPH you are getting during production. There are a lot of variables to c
Electronics Forum | Tue Dec 06 08:11:41 EST 2005 | lwright10
is the Chuck set correctly on the collers, Wide jaw Soft spring & Narrow jaw hard spring. Also check the pick up angle in the feeder file.
Electronics Forum | Mon Dec 12 12:25:11 EST 2005 | John
I'm having problems feeding these to the pick and place. As the tape peels off the pocket the part sticks to the tape rather than remaining in the pocket. Machine is QUAD QSV. We've tried all generations of feeders we have available. Any advice is
Electronics Forum | Mon Dec 12 13:11:16 EST 2005 | bobpan
Sounds like too much adhesive on the tape or static electricity. Try grounding the feeder if you think its not adhesive/tape related.
Electronics Forum | Thu Dec 15 19:45:15 EST 2005 | Liza
Hi Rob, I would be asking the customers about that. I've read somewhere that teflon is used on feeders, is this a standard and does the absence or presence of this contribute to tape tearing? Thanks, LIza
Electronics Forum | Wed Jan 18 14:48:40 EST 2006 | PWH
Dual lane 8mm prec. pro feeders are capable of being set for 2mm or 4mm index, correct?
Electronics Forum | Tue Jan 31 15:54:50 EST 2006 | vickt
PWH FYI...All current cart shipments are 13" reel compatible. A few single lane 8mm feeders is not a bad thing to have along with the 7" DL, as they can handle both. T.Vick UIC
Electronics Forum | Wed Jan 18 12:21:06 EST 2006 | james
I dont really care about res. and caps. as much as I do ICs. Most of the parts fall out from feeder problems or Vib settings.
Electronics Forum | Mon Feb 13 16:56:07 EST 2006 | bigdaddysoy9
Thanks for your response PWH. These are the exact same issues we have been having. I did call UIC about that feeder jig. It cost about 12k USD. Do you guys use it? Is it worth the money?
Electronics Forum | Fri Feb 17 14:55:36 EST 2006 | Mity-C
Jobbie, We are also not using the Mydata forks for the vibe feeders. We take a tube for the vibe component and cut a pick pocket. We use the back of the forks as stops. This has eliminated many of the pick problems from the vibes. Good Luck Chris
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
