Electronics Forum: feel cp or cp4 (Page 1 of 3)

Looking to Buy CP4-3 or CP6

Electronics Forum | Wed Dec 17 12:51:56 EST 1997 | Mike Cox

Anybody have one of these machines feel free to call or email me Mike Cox 1-208-887-1000 MCCOX94@AOL.COM Thanks for your help

Re: Looking to Buy CP4-3 or CP6

Electronics Forum | Wed Jan 28 15:42:26 EST 1998 | Anonyous

Anybody have one of these machines feel free to call or email me Mike Cox 1-208-887-1000 MCCOX94@AOL.COM Thanks for your help You should really consider buying a Siemens Siplace machine. They are much better and service/support is excellent

Concave Terminals Help. CP4 or GSM

Electronics Forum | Wed Nov 13 14:55:42 EST 2013 | jimmyboz

The CP4 will place them all day with no rejections. If they are small target the CP4, if they are large, select the GSM.

Concave Terminals Help. CP4 or GSM

Electronics Forum | Thu Nov 14 17:22:47 EST 2013 | dman97

Yes CP4 with vision type 12 will place these no problem. I am even putting these down on an old CP3 with no problems.

Concave Terminals Help. CP4 or GSM

Electronics Forum | Wed Nov 13 09:27:42 EST 2013 | zrunkle_api

Thanks I will give that a Try.

Concave Terminals Help. CP4 or GSM

Electronics Forum | Mon Nov 11 02:03:06 EST 2013 | dman97

Use fuji vision #12. That is for the resistor network types. You cant inspect the individual leads. Vision type 12 tell the CP that this is a rectangular chip with terminals. You don't need to define the leads in the PD just the overall shape of th

Concave Terminals Help. CP4 or GSM

Electronics Forum | Fri Nov 08 12:27:46 EST 2013 | zrunkle_api

That is what I'm currently doing. But we are getting errors with placement. I would like to insp. the lead them self.

Concave Terminals Help. CP4 or GSM

Electronics Forum | Fri Nov 15 09:59:42 EST 2013 | zrunkle_api

When I used the 12 code I saw worse placement then with the 254 that I used in the past. So far my best and most consistent results came for the GSM with only looking at the outside edges of the part. Thanks again for everyone’s help.

Concave Terminals Help. CP4 or GSM

Electronics Forum | Wed Nov 13 09:22:03 EST 2013 | swag

We run these all the time. Agree with other posts. I tried a few times to read leads on these with mixed results. Leadless is best. On GSM - run as leadless or chip and crank the lighting up on 2.6 or 4.0 ULC. You should get good centering.

Concave Terminals Help. CP4 or GSM

Electronics Forum | Fri Nov 08 11:10:36 EST 2013 | rgduval

I'm not completely sure what you're asking, but, I can say that I've placed these parts with MyData's and Philips machines. Pick in the center of the part, and place in the center of the outline, and the terminals should line up with the pads on the

  1 2 3 Next

feel cp or cp4 searches for Companies, Equipment, Machines, Suppliers & Information