Electronics Forum: fiducial alignment (Page 1 of 10)

fiducial

Electronics Forum | Thu Oct 21 06:26:50 EDT 2004 | dennispoquiz

Right. Fiducial comes with the CAD data or the gerber files. If it doesnt, and you need to create fiducial coordinates, you may use a digitizer or a caliper and make use of the reference pin as the origin. Now if the fiducial camera focus is way out,

Fiducial alignment on Juki

Electronics Forum | Thu Dec 18 14:38:58 EST 2014 | rangarajd

Hello, I don't have any experience with Juki. Visited one of their booth recently and I was told they use a laser for alignment. How does this work? Is there any advantage over the traditional vision alignment? Thanks!

Fiducial alignment on Juki

Electronics Forum | Sun Dec 21 23:30:09 EST 2014 | sarason

Since the Laser alignment bit is attached to the head and you don't have to move the part to a camera location, before placing the component on the board it is about the fastest method there is of getting accurate component alignment. With more moder

Fiducial alignment on Juki

Electronics Forum | Fri Dec 19 12:43:01 EST 2014 | emeto

I had some of these before and they do a decent job. Laser alignment is ok for passive components. Compared to vision systems it has mainly disadvantages. If you have bended lead on IC for example, it wouldn;t catch it and it will place the part. I w

Local fiducial spacing...

Electronics Forum | Fri Jun 10 18:44:28 EDT 2005 | Frank

This depends on how the software of your particular machine was written (designed) to handle local fids. Most machines do not have a requirement about the position of the local fids. The purpose of local fids are the same as global fids. All the p

DEK265 alignment out of range

Electronics Forum | Thu Mar 19 03:07:31 EDT 2020 | weglimir

We have DEK265 and a problem with few projects. Normally it works great, but sometimes we have an issue with Alignment out of range error. Currently we have a project where after fiducials configuration in step mode printer shows an error : Align

DEK265 alignment out of range

Electronics Forum | Tue Mar 31 09:25:18 EDT 2020 | emeto

If you believe your picture is in the middle and is not skewed, than go to your basics and recheck your fiducial locations and detection. Sometimes these machines recognize something around and give you this error. Try program with isolated pads and

MyData placement precision / alignment

Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval

+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and

GSM1 not performing fiducial PEC?

Electronics Forum | Mon Mar 07 18:23:30 EST 2016 | ttheis

Hi everyone, I'm about 90% to running production on my gsm but I'm not able to get the machine to look at fiducial marks and make corrections to the placement. When I run advanced board configuration and seek to the first fiducial the pec camera tra

Block repeat and fiducial relation

Electronics Forum | Fri Aug 22 15:26:18 EDT 2008 | rway

I rarely use blk fiducials. But when I do, they are always programmed after the fids. It's the fids that sets your general alignment of the panel. I only use blk fidus for thin pcbs (30 mil) that tend to warp when on the conveyor.

  1 2 3 4 5 6 7 8 9 10 Next

fiducial alignment searches for Companies, Equipment, Machines, Suppliers & Information

convection smt reflow ovens

Component Placement 101 Training Course
2024 Eptac IPC Certification Training Schedule

Reflow Soldering 101 Training Course
2024 Eptac IPC Certification Training Schedule

Best Reflow Oven
Global manufacturing solutions provider

World's Best Reflow Oven Customizable for Unique Applications