Electronics Forum | Thu Sep 02 14:02:49 EDT 2004 | russ
Frank, We are currently running lead free for approximately 1 yr. now but no where near the volumes you have mentioned. We are about 5k units per month. I personally am in agreement with you as far as OSP. I also do not like white tin finish since
Electronics Forum | Tue Sep 14 14:52:22 EDT 2004 | Carol
During processing, the solder in the vias reflows and forms solder balls. PCBs have solder in random PBGA vias from the board manufacturer.The manufacturer says this is a result of the HASL process and is unavoidable. We use HASL finish, multilayer,
Electronics Forum | Tue Sep 21 16:09:08 EDT 2004 | davef
Q1: What is "enough surface free energy"? A1: Look here for background: http://www.azom.com/details.asp?ArticleID=1575 Q2: How do I determine surface free energy? A2: We look at it a relative term. For instance, a semi matte finish on solder mask
Electronics Forum | Wed Apr 06 11:10:47 EDT 2005 | smt_rookie
We process a double-side reflow board (10 ups). Chips and IC's on the bottom side while chips, IC's plus thru-hole connectors and IC sockets on top side (bottom side first then top side reflow). In the past, we were not encountering any soldering pro
Electronics Forum | Tue Jun 07 16:19:58 EDT 2005 | davef
Q1) How to identify on good or bad ICs lead that could contribute to dewetting? A1) Distinguish between good or bad IC that could contribute to dewetting by testing for solderability, according to J-STD-002. Q2) What actions that must be taken in fa
Electronics Forum | Mon Jun 27 14:20:57 EDT 2005 | Bob R.
If you visually inspect the solder joints of the first dozen or so boards with the Pb free parts and you're meeting workmanship standards then I wouldn't worry about it. When we started getting the first barrage of Pb free parts a couple years ago w
Electronics Forum | Fri Mar 17 16:58:52 EST 2006 | mikecollier
We are currently struggling with a particularly difficult component selection form our designers. This is a custom BGA, 592 balls, metal cover with a very large bead of adhesive using to retain the cover. We have had significant fallout (greater th
Electronics Forum | Tue Dec 26 22:18:20 EST 2006 | davef
Common methods to replate components are: * Barrel plating http://www.finishing.com/Library/zemo/barrel.html * Hot solder dipping - MIL-F-14072 M258 Certainly you can do this yourself by dipping the component leads into a solder pot containing lead
Electronics Forum | Mon Feb 19 22:56:20 EST 2007 | davef
Russ We agree with your comments on plugging from one side only. But... We believe that it IS possible to trap process chemicals [technically, not flux] in a blind [or any other] via. This can be done by plating the via closed, rather than pluggi
Electronics Forum | Thu Apr 17 10:44:24 EDT 2008 | rculpepp
I'd suspect contamination also, possibly from the board supplier. Sr. Tech's post mentioned what looks like a blister on the board, in the upper right of the Q19 photo. This could very well be a contaminate from the PWB fab shop. I've seen similar pr