Electronics Forum: fluid dispensing (Page 1 of 3)

time/pressure dispensing

Electronics Forum | Thu Jun 22 19:43:05 EDT 2006 | davef

We hope this meets your standards for acceptable responses. * http://www.uic.com/wcms/images2.nsf/(GraphicLib)/Time_Pressure_Dispensing.PDF/$File/Time_Pressure_Dispensing.PDF * On the Flow Rate Dynamics in Time-Pressure Dispensing Processes; X. B. C

super fine pitch paste & dispensing questions

Electronics Forum | Mon Aug 16 20:50:05 EDT 2010 | adhesivedispenser

CiXi Tian Hao Electric Technic Co.,LTD manufactures adhesive dispensing equipment and may be able to offer assistance with your application. Check out our product information at http://dispensing-th.com. We manufacture dispensing equipment ranging fr

Conductive Adhesive and UV cure adhesives dispensing

Electronics Forum | Fri Feb 21 20:14:53 EST 2003 | MA/NY DDave

Hi I don't know of anything special in the ways of dispensing since they don't normally care about the differences of UV or Conductive or pastiness. The only difference is WHAT you are striving to do with the adhesive and how the adhesive moves as

Automated or Semi-Automated Thermal Gel Application

Electronics Forum | Wed Oct 16 10:51:35 EDT 2019 | radialvalve

Hi Joe, sorry for the delay in responding to your request, hope it's not too late. There are several questions to be answered before we can guide you to the best solution to meet your Thermal Gel Dispensing Needs. I would like the opportunity to disc

Bubbles on solder joint(after conformal coating curing)

Electronics Forum | Wed Dec 02 20:11:37 EST 2009 | prodivegsr

Hi Lou, we are using a fluid dispensing machine. our current requirement is around 50um. From the Datasheet,the thinner 73 has a higher evaporation rate of 1.0 comapring with thinner 521 at 0.6... does the higher evaporation rate eliminate the bu

SMT Product Line Expansion

Electronics Forum | Thu Apr 21 08:45:53 EDT 2005 | davef

Top 10 products relating to solder paste are: * Printer * Stencil * Stencil storage rack * Squeegee * Squeegee holder * Under stencil wipe * Under stencil cleaning fluid * Stencil cleaner * Dispenser * Paste stirrer * Used paste / empty paste contain

quad 4c automatic paste dispencer

Electronics Forum | Mon Jun 19 08:49:40 EDT 2017 | westshoredesign

Just buy a separate machine to apply paste. You'll be able to run faster, (by doing more at the same time) and you can probably find an air-over-syringe system for less than $2000USD. At the end of the day, that's probably less than you'll spend in t

Ekra E5 cleaner dispenser problem

Electronics Forum | Fri Jan 03 00:22:02 EST 2003 | Steve

We have an Ekra E5 that uses what looks like standard auto valve stems to dispense the cleaning fluid. They leak.. Are they just standard schrader valves or are special to withstand the chemistry of stencil cleaner?

Wave Solder Bean Bags

Electronics Forum | Thu Jun 09 20:48:07 EDT 2016 | deanm

I'm assuming these are two leaded axial components. GPD Global makes fluid dispensing and component prep equipment. Component leads can be formed (or bent) in order to provide some resistance in the hole during insertion. This should prevent the comp

Connector is falling down in the second reflow

Electronics Forum | Tue Feb 11 10:51:20 EST 2020 | slthomas

To predict whether or not a first pass part is going to come off during the second pass you need to calculate the ratio of weight/soldered surface area. According to a couple of different sources that I've dug up, maximum is around 44 grams/in.^2. I

  1 2 3 Next

fluid dispensing searches for Companies, Equipment, Machines, Suppliers & Information

GPD Global
GPD Global

A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.


611 Hollingsworth Street
Grand Junction, CO USA

Phone: (970) 245-0408