Electronics Forum | Tue Apr 05 03:16:45 EDT 2011 | grahamcooper22
one of my customers with a BTU VIP 70 has the following settings, 100 / 175 / 210 / 250 / 265 with conveyor speed of 18 ins per minute. They get a peak temp of 240~245C and time above liquidus of 220 C is @ 55 secs. Built in thermocouples should give
Electronics Forum | Fri Jun 03 14:21:48 EDT 2011 | rgduval
I haven't seen that particular fail....but... What was the failure with the M controller? Might try moving your MOT cards around, to see if the failure follows one particular card. If so, you'll know you need a new MOT card. That might satisfy th
Electronics Forum | Mon Sep 19 23:45:07 EDT 2011 | haiae
I just bought one used Contact 3AV machine and going to calibrate the machine. I just found a problem that I have no tool tips to do follows they instruction. Does anyone who can tell me how to solve this problem. Await for any comment. Thanks in adv
Electronics Forum | Fri Sep 23 16:39:00 EDT 2011 | action_101
The small investemnt of purchasing the IPC-610 manual will pay for itself very quickly. A brief description of the two classes in a few words would be the following: Class II - a well built product with reasonable expectations for both the manufactur
Electronics Forum | Thu Jan 19 12:38:03 EST 2012 | cobham1
I am wondering if the failurs that people see are discovered right away or when the units are out in the field. Reason I ask this follow up question is the units that are having problems are all returns from our customers. Is there a way to check for
Electronics Forum | Tue Feb 21 08:12:11 EST 2012 | vparis
Hey I am in need of the following replaclment parts for an MPM SPM-AV s/n: 7095 Im looking for the Z-Axis Motor MPM p/n: 000298 and a Z axis belt MPM p/n: p2387 Let me know if you have any of these or you can shoot me in the right direction.
Electronics Forum | Wed Feb 29 06:33:49 EST 2012 | amitsindwani
Please define the defect in following conditions & link to IPC 610 clause/sub-clause no.: 1. 0603 component placed on 0805 PCB pad 2. 0805 component placed on 0603 PCB pad 3. 1206 component placed on 1210 PCB pad and 4. 1210 component placed on 1206
Electronics Forum | Wed Aug 01 11:22:25 EDT 2012 | davemac62
ERROR: "The specified i/o operation on DeviceHarddisk0Partition01 was not completed before the timeout period expired" This is followed by out of control conveyor speed and zone temps. Oven recovers when the error is acknowledged. This is happenin
Electronics Forum | Wed Aug 29 10:03:09 EDT 2012 | rway
Just to follow up, I have located the parts I was seeking for our Siemans S25 machine from Emil Mann at Global SMTservices (globalsmtservices@yahoo.com). PH: 404-200-4637. Just in case someone else may need a good lead for spare parts.
Electronics Forum | Thu Sep 13 00:13:43 EDT 2012 | vikings
I recently purchased two used manual pick and place rotary carousel machines. They did not come with any literature and I've searched Google, this forum, and a few others with no luck. Does anybody know where I could find the owners/operator manuals
