Electronics Forum | Thu Aug 08 04:35:38 EDT 2013 | alexeis
Hi, We have a software tool (called QPlan) that can give you a solution for polarity and deviation problem on SMT machines. You can read about it on our site: http://www.proventustech.com. Also, you can send me an email: alexeis@proventustech.com.
Electronics Forum | Fri Jul 26 02:10:35 EDT 2013 | starlogixs
Hello. I am trying to find software for a Juki KE720 pick and place machine. I am planning to buy a seconhand machine but the software is missing. Would appreciate if anyone could help with where I could source the original Juki software shipped with
Electronics Forum | Fri Jul 26 03:52:03 EDT 2013 | danyquintard
Hi We produce electronic pcboards for the aircraft industry. Some of our clients think that the thickness of the varnish left is proportional to the intensity of the blue color of uv's pigments in the varnish. Out off, we know that is not true. The
Electronics Forum | Mon Jul 29 12:42:15 EDT 2013 | cyber_wolf
We want a dedicated machine because we have some concerns with SMT adhesive residue that is in the bath contaminating boards. We are getting pretty heavy into class 3 so everything has to be pretty much perfect. We run 2 shifts and have 5 lines so w
Electronics Forum | Fri Jul 26 11:20:33 EDT 2013 | gnus
Hi all, I'm having issues placing 7 pin DPak packages. I'm using mechanical centering with four centering phases (one for each orientation). Tool used is A24S. Machine picks up the part but will reject it when centering the part. I have measured all
Electronics Forum | Mon Jul 29 15:30:45 EDT 2013 | markhoch
Nitrogen in Reflow is grossly over-rated...., in my opinion, and in the opinion of several very well known SMT Industry "God Fathers". Way too much $$$, for a slight increase in the process window. If you profile your oven specifically for your pr
Electronics Forum | Mon Jul 29 19:17:27 EDT 2013 | peteralmendrala
Hi Guys! I hope you could help me with my problem. I am currently repairing our speedline mpm spm printer, its software has been corrupted. Does anyone here be able to provide me the installer for the said machine. Our backup installer from floppy di
Electronics Forum | Tue Jul 30 07:29:06 EDT 2013 | scotceltic
We are currently experiencing thermal shock failure on a BGA package. We are currently looking at improvements to improve the thermal shock properties by using underfilm. I have seen some studies out there that use this process to improve drop test
Electronics Forum | Tue Jul 30 12:27:39 EDT 2013 | jorge_quijano
Hola I have this connector (atached image) for Wave Solder process, there is one pin with no solder on the top, for me it seems that the large trace connected to that pin is "stealing" the heat... I'm not WS expert... can it be corrected by profile?
Electronics Forum | Wed Jul 31 18:26:09 EDT 2013 | Jeff Kennedy
You might consider to contact a lab to Run a microindenter against a know good soft gold sample. The knoop value for the soft gold will be much lower than for hard gold. This would be reflected in the diameter measurement of the indented samples.Smal