Electronics Forum | Wed Jun 02 14:49:57 EDT 2021 | fluidmetal
Hello everyone! We have developed a technology to etch metal and PCBs using saltwater and electricity and now have our very first product! Please answer our short survey here: https://forms.gle/KMHyYU19eBDnPwhy8 Thank you so much!
Electronics Forum | Wed Jun 02 20:15:03 EDT 2021 | jamesatqkits
Hello wonderful people. Does anyone know if I can get away with a 1mm fiducial on a Samsung CP45, I know the manual states the beam is .6mm and Fid's should be 2mm. Anyone have experience with this? Thanks, James in Canada have a great day everyone.
Electronics Forum | Fri Jun 04 11:32:50 EDT 2021 | stephendo
What about the bar code reader? The ability of them vary a lot. One machine had problems reading clearly printed barcodes. But after new software it would read them well. And later we got boards with the datamatrix barcodes silk screened on. They we
Electronics Forum | Mon Jul 26 20:40:48 EDT 2021 | stephendo
Software makes a huge difference. Try a different barcode reader app and see if you can find a better one. With data matrix the bar code can be mostly a bunch of blobs as long as the outside is reasonable good. Then the reader only needs a few pixels
Electronics Forum | Fri Jun 04 14:35:39 EDT 2021 | pjchonis
Hello everyone, I am just curious if anyone has any common problems when using Kyzen or Zestron? Why did you initially choose to use one of their products in the first place? In your opinion, what are the pros and cons? I would love to know your tho
Electronics Forum | Fri Jun 04 17:44:20 EDT 2021 | dwl
The hardest part was convincing management of the need for a stencil cleaner in the first place. Cleaning by hand using IPA and a lint free cloth just leads to clogged apertures and print defects. BTW, lint free cloths leave behind a lot of lint.
Electronics Forum | Wed Jun 16 08:16:27 EDT 2021 | shmevan91
Hi, Could anyone shed some light why a mk5 13 zone heller ovens rail width won't auto adjust? has to be done by hand every time we change product. The board support rail will adjust just not the main rail, have tried swapping the two cards around bu
Electronics Forum | Wed Jun 16 14:07:15 EDT 2021 | oxygensmd
For example, I had the same problem on my Rehm oven. It was in calibration mode. The machine is going to maximum transport width but sensor wasn't reached and the machine stucked in calibration mode. Maybe there are manual mode for transport width a
Electronics Forum | Thu Jun 17 18:01:07 EDT 2021 | bmalhi
Please check mechanical side if lead screws turning freely, binding screw could be the issue. Electrically please check if edge width motor is getting the required voltage. New ovens have the overload relay and the circuit protection fuse. Please con
Electronics Forum | Thu Jun 17 18:08:05 EDT 2021 | emeto
Evan, not sure if you solved it already. I wanted to mention any couplings being lose related to the motor and conveyor movement. Some have set screws that get lose with time. Also when you say manually, do you meant with a handle or you mean through
