Electronics Forum | Wed Jun 14 03:21:29 EDT 2017 | bukas
hello everyone, I got a Heller reflow oven that operates at 3x240V and a delta-delta transformer since my grid is 3x380V. the problem I have right now is that there is no neutral line at delta-delta transformer, also there is no neutral line at oven
Electronics Forum | Thu Jun 15 14:51:37 EDT 2017 | bmalhi
If machine serial tag referring to 3Ph, 208-240V then you cannot apply 3Ph, 380V. In order to use 3Ph, 380V supply you have, machine needs to be retrofitted to work with this voltage. If you apply 380V without voltage conversion, you will damage som
Electronics Forum | Fri Jun 16 02:29:38 EDT 2017 | cpcompany
Dear All. My name is Casey Park from Starworks Korea. These days we purchased pre-owned Mirtec MV-9 inline 3D AOI from a customer site and have it fully refurbished and upgraded by Mirtec HQ. If anyone has a plan to invest 3D AOI or upgrade old 2D
Electronics Forum | Tue Jun 20 16:41:12 EDT 2017 | kkrestchmer
We have a Speedline Electrovert Bravo 8 reflow oven. We have issues where we get a "thermal runaway HTSC trip" error and the oven shuts down. We normally can unplug and replug a connector into the Sensor/Relay Watlow AnaFaze TLM-8 module and it sta
Electronics Forum | Fri Jun 23 12:21:29 EDT 2017 | rgduval
I'm going to guess that you've tried Speedline with no success. They're awfully annoying about their older machines. Things to check: - Thermistor for the zone working properly? - Opto for the zone working correctly? - Heaters working correctly? -
Electronics Forum | Tue Jun 20 17:23:04 EDT 2017 | snevermind
I have a stamped steel battery contact to pick that has a pick location 11mm deep in the tape. The factory machine settings only allow 6.6mm of "over-drive" depth past the top of the carrier tape. Based on that, I will need a custom nozzle that is
Electronics Forum | Wed Jul 05 03:10:08 EDT 2017 | pcbcart
Claire, my suggestion is different from BentePCB & Pavel Murtishev. Although 500pcs cannot be considered as a mass production order, it's too larger to be placed as a prototype order. And I think the PCB quality & performance is very important, you c
Electronics Forum | Wed Jul 12 04:56:00 EDT 2017 | youth
I think that both pcb prototype manufacturers or factories for big amount, will have their manufacturing capacity, the focus is still depends on your gerber file. You can consult and then place an order. I have used wellpcb, which is focus on rapid
Electronics Forum | Sat Jul 29 02:05:39 EDT 2017 | benny
We now offer free expedite for PCB prototype. Min $5 for Standard 1-2 layers board with 24-48H lead time http://www.allpcb.com/T2 Min $34.78 for Standard 4 layers board with 48-72H lead time http://www.allpcb.com/T2 We thi
Electronics Forum | Wed Nov 22 00:44:13 EST 2017 | wellpcb
Hello there, Do not know if you have already chosen the supplier to start your order. This is wellpcb, which have two modern PCB factories. WellPCB specializes in online prototyping and assembly. WELLPCB is capable of producing 100,000 square feet o
