Electronics Forum | Mon Apr 08 14:07:25 EDT 2024 | kingkelvin
Hello all - so I got in the calibrate plate for hydra tool offsets - it completed the calibration - I then installed the first row of white tips with the menu - and the machine still does same thing it puts the tips away but makes a hitting type nois
Electronics Forum | Mon Apr 08 15:07:56 EDT 2024 | tey422
To me, it seems like there are slightly XY offset. Hydra might be able to pick up the tips, but not all the way securely attached to the hydra tubes. So, when the tips put back are not fully seated, which causing the tool stick inside the bank. You
Electronics Forum | Mon Apr 08 15:47:07 EDT 2024 | kingkelvin
Hi all - all good info thanks, so my indicator levels are a bit off which I knew - but I didn't realize that might be the source of this problem - after speaking with PFI and realizing the next step is to get the indicator levels to the 190 range (ma
Electronics Forum | Mon Apr 08 17:27:36 EDT 2024 | kingkelvin
I found a 0.9mm hex tool - but if I adjust the indicators "all the way up" on the shaft I get all current ranges at 255 (so obviously too high on the shaft) but if I place it anywhere else on the shaft (slightly down from top, or all the way down as
Electronics Forum | Thu Apr 18 17:47:42 EDT 2024 | dwl
Is your stencil worn out? If your once flat stencil is now wavey, you will be depositing more paste. Ideally, you'll have historic SPI data to compare known good volumes from past prints to the current. Another possibility is moisture. Bake your boa
Electronics Forum | Thu May 11 04:23:50 EDT 2000 | Earl Moon
Hey folks, I'm on your side, as I said many times in this string. To end it, from my point of view, I will offer the following diatribe with which I responded to one of you whom I respect very much - Dave F. This is my last say on the subject and I
Electronics Forum | Thu Aug 24 12:35:30 EDT 2000 | Wolfgang Busko
The dilemma with this is that the search in the archive is often not that enlighting as someone might hope. Fact is that each new question (and the answers as well) on old topics adds to the archive making it not better. Well, and than look for the r
Electronics Forum | Fri Aug 18 05:05:11 EDT 2000 | Wolfgang Busko
Not that I have any experience with the proflow system but here are some words from a well respected former contributor on this forum who asked me to pass this one along. "About DEK's Pro Flo system: Advantages considerably outway disadvantages. Sp
Electronics Forum | Wed Mar 28 18:23:48 EST 2001 | Mike Konrad
Hi Bill, Please let me refresh your memory� On April 1, 1999, the United States Environmental Protection Agency sent you a letter based on what they called �inaccurate� statements made by SmartSonic (ironically on SMTNET.COM). EPA letter dated Apr
Electronics Forum | Wed Mar 28 20:03:33 EST 2001 | Rob Fischer
This is brutal. I think we should call a truce. Mike has very good points and his quotations from the EPA letter are fact. If there isn't a competitor of Bill's who hasn't seen this letter I'd be surprised. We could go on and on about this and th
